艾锐数码

Key Features:

11N wireless technology， 150Mbps wireless speed
The default AP Mode Plug and Play， no configuration， compact and portable， business travel home are both
Good compatible smart phones， tablet PCs， notebooks / netbooks and other equipment
Support AP (wireless access point)， Client (wireless client)， Repeater (wireless relay)， Bridge (wireless bridge)， Router (wireless routing) five operating modes
AP mode - the default mode. In this mode， the device is a wireless access point that supports Plug and Play， no configuration.
Router Mode - In this mode device is equivalent to a wireless router， wired interface as a WAN， a wireless LAN. Multiple wireless clients can share a broadband Internet line.
Repeater mode - Radio Relay function utilizes equipment， wireless signal relay and amplification， and the formation of new wireless coverage area， and ultimately extend the wireless network coverage purposes.
Bridge mode - use bridging equipment， first FW150RM establish a wireless connection with the front end wireless network and then send out a radio signal itself， forming a new wireless coverage， can effectively solve the signal is weak and dead spots wireless coverage problems.
Client Mode - In this mode the AP is a wireless client to the main AP， the equivalent wireless network card.
Provide a LAN / WAN wired interface， wireless routing mode can be automatically switched to WAN port

Protocols and Standards

IEEE 802.11g、IEEE 802.11b、IEEE 802.3、IEEE 802.3u、CSMA/CA、CSMA/CD、TCP/IP、DHCP、ICMP、NAT、PPPoE

Wireless rate

150Mbps

Port (LAN / WAN port)

A 10 / 100M adaptive LAN / WAN port auto-flip (Auto MDI / MDIX)

Push button

Reset Reset button

Antenna

Built-in intelligent omni-directional antenna

Network Media

10Base-T: Category 3 or higher UTP Category 3

100Base-TX: 5 class UTP

LED indication

Status Indicator

Dimensions
(L x W x H)

81mm x 71mm x 28mm

Environment

Working temperature: 0 ℃ to 40 ℃

Storage temperature: -40 ℃ to 70 ℃

Humidity: 10% to 90% RH non-condensing

Storage humidity: 5% to 90% RH non-condensing

Radio parameters

Basic functions

Wireless switch;

SSID broadcasting switch;

Channel selection: 1-13;

Bandwidths optional: 20MHz， 40MHz， automatic;

Wireless modes are available: 11n only， 11 bgn mixed， 11 bg mixed， 11g only， 11b only.

Working mode

AP (wireless access point) mode;

Client (wireless client) mode;

Repeater (wireless repeater) mode;

Bridge (wireless bridge) mode;

Router (wireless routing) mode.

Wireless Security

Wireless MAC address filtering;

Wireless security function switch;

64/128/152 bit WEP encryption;

WPA-PSK / WPA2-PSK， WPA / WPA2 security mechanism.

Wired function

Useful Features

IP bandwidth control function (wireless routing mode support);

Peanut shells DDNS (wireless routing mode support).

Network Settings

WAN port connection type support: PPPoE， dynamic IP， static IP (wireless router mode support);

Dial-up Type: Automatic dialing， on-demand dialing， manual dialing， timing function (wireless routing mode support);

MAC address modification and cloning (wireless routing mode support);

VPN Pass-through (wireless router mode support);

Static routing (wireless routing mode support).

DHCP settings

DHCP server (wireless client mode is not supported);

Client list (wireless client mode is not supported);

Static address assignment (wireless client mode is not supported).

Port Forwarding

Virtual server (wireless routing mode support);

Special applications (wireless routing mode support);

DMZ host (wireless routing mode support);

UpnP (wireless routing mode support).

Security Settings

IP and MAC address binding against ARP attacks (wireless router mode support);

IP address filtering (wireless router mode support);

Domain filtering (wireless router mode support);

MAC address filtering (wireless routing mode support).

System Tools

Traffic statistics;

System logs;

Remote Web management;

Configuration file import and export;

TFTP software upgrade.