Item Descriptions:

color:

Normal type

A USB terminal was attached to the holder for smartphone bike.

■ Have you ever been in trouble with the battery of the smartphone if you used a smartphone in a motorcycle?

■ In such a case, if you can charge the smartphone holder with a USB terminal attached, there is not such a nice thing!

■ The troubles of those who are in trouble like this have also been solved!

ON / OFF switch included!

■ Thank you for waiting.

Energizing the battery when not driving the engine.

{I wish I could cut this!

Supplied ON / OFF switch to cut off energization of standby power to the battery.

Full speed rapid

charging!

■ It outputs up to 2.4A.

It is possible to charge quickly from smartphone to tablet with full speed.

iSmart output automatic judgment function installed!

■ Automatically detects the connected device and sends the appropriate current.

Fixed stability feeling that rubber rubber grip also got attached!

■ When using a bike with a smart holder it is a sense of stability with no grub during traveling.

■ To obtain that sense of stability, rubber rubber was attached.

■ Although it is a powerful rubber grip, it is a consumable item and we attach one as a spare.

(Please use with red / black as you like.)

specification

[Product size] 103 × 53 × 112 mm [Weight] 114 g

[Corresponding size] Mounting equipment: Width 40 mm - 100 mm * Please open and close with the button at the bottom right of the holder.

【Corresponding pipe diameter】 22 ~ 35 mm

Clamp thickness adjustment sheet 2 mm × 3 sheets will be attached.

【Material】 Body: Plastic Aluminum Pad: Rubber

【Set contents】 Main body (Power supply wiring approx. 1.6 m included (red plus / white or black minus)) / Thickness adjustment sheet for clamp / clamp

USB terminal

[Input] 12V - 24V

[Output] USB 5 V - 2.4 A

【Waterproof】 IP65

Quick charge USB socket included

When using a bike Have you not needed a USB socket to charge a smartphone while using a smartphone?

Unlike a regular motorcycle holder, it has a USB terminal.

With waterproof cover

A rubber cover for waterproof protection is attached so that water and dust do not enter into the USB socket part.

Waterproof tested.

IP65

Two rubber grips are included for fall prevention

Is there something uneasy about whether a smartphone falls during motorcycle driving?

In order to eliminate the anxiety, a rubber grip was attached for fall prevention.

It also included two (red / black) including spare.

Your concern will be solved with this!

360 degrees fixed at your preferred position

It is possible to fix the alignment to your liking at 360 degrees with plastic balls.

Correspond to a wide range of movable range width!

Supports a wide range of models ranging from 4.0 cm to 10.0 cm!

Fall prevention step changed to movable type!

Because the fall prevention step was changed to the movable type, it prevented the hiding of required terminals such as earphone terminals of various kinds of smartphones.

Thickness adjustment sheet included in clamp part

When attaching to the handle part, thickness adjustment sheet is attached so that it can correspond to a wide handle diameter from 22 mm to 35 mm.

You can respond to various kinds of motorcycles even when transferring.

(When considering please confirm the handle diameter.)

Easy installation

Following functionality / waterproofing is easy to install.

Simply connect a positive (red wire) to the ACC power supply and connect the minus (black wire or white wire) to earth.

(Caution: It is recommended to add a separate fuse for protection to plus (red wire).)

The wiring of power supply is about 1.6 m and there is room.

Caution

* Please refrain from using electrical components etc. exceeding the specified amount.

It may cause a malfunction.

※ It can not be used for battery-less cars.

* Depending on the deteriorated state of the battery, it may not operate properly.

※ This product should be installed by experts with electric knowledge and bike structure knowledge.

Features:

• 【Product Size】 103 × 53 × 112 mm 【Weight】 114g 【Material】 Body: Plastic Aluminum Pad: Rubber
• [Corresponding size] Mounting equipment: Width 58mm ~ 90mm ※ Please open and close with the button at the bottom right of the holder.
• Corresponding pipe diameter: 22 ~ 35 mm (clamp thickness adjustment sheet 3 mm × 2 sheets will be attached)
• [Full speed charge] It outputs up to 2.4A.
• It is possible to charge from the smartphone to the tablet at full speed.
• 【ON / OFF selector switch included】 【Barsado】 logo Trademark registration No. 5766708
• 【Set contents】 Main body (Power supply wiring approx. 1.6 m included (red plus / white or black minus)) / Thickness adjustment sheet for clamp / clamp
• For ordering additional rubber grip please click here http://www.amazon.co.jp/dp/B01FYXAC7S

Product information:

Shipping Weight: 163 g

Package Dimensions: 6.91 x 7.80 x 11.61 cm