MQ-2 gas sensor detects smoke methane butane analog sensor (H1B5)
First size : 32mm X22mm X27mm length X width X height
Second the main chip : LM393 ZYMQ-2 gas sensor
Third the working voltage : DC 5 V
Four characteristics:
1 having a signal output instruction .
2 the dual signal output ( analog output and TTL level output )
3 0 ~ 5V analog output voltage the higher the concentration the higher voltage.
4 liquefied petroleum gas natural gas city gas smoke have better sensitivity.
5 with a long life and reliable stability
6 rapid response and recovery characteristics
V. Application :
For home or factory gas leakage monitoring device suitable for liquefied petroleum gas butane propane methane alcohol hydrogen smoke and other monitoring devices.
MQ-2 gas sensor parameters :



A. Standard Operating Conditions
Connection mode:
1 VCC: is connected to the positive pole (5V)
2 GND: with the negative electrode of the power
3 the DO:TTL switch signal output
4 AO: output signal
Symbol | Parameter name | Technical conditions | Remark |
Vc | Circuit voltage | 15V | AC or DC |
VH | Heating voltage | 5.0V 0.2 V | AC or DC |
RL | Load Resistance | Adjustable |
|
RH | Heating resistors | 31 3 | Room temperature |
PH | Heating power | 900mW |
|
B. Environmental Conditions
Symbol | Parameter name | Technical conditions | Remark |
Tao | Temperature | -10 -50 |
|
Tas | Storage temperature | -20 -70 | |
RH | Relative humidity | Less than 95% RH | |
O2 | Oxygen concentration | 21% ( standard conditions ) Oxygen concentration can affect sensitivity | A minimum value greater than 2% |
C. sensitivity characteristics
Symbol | Parameter name | Technical parameters | Remark |
Rs | Sensitive surface resistivity | 3K-30K (1000ppm isobutane ) | Probe concentration range 100ppm-10000ppm LPG and propane 300ppm-5000ppm Butane 5000ppm-20000ppm methane 300ppm-5000ppm hydrogen 100ppm-2000ppm alcohol |
(3000/1000) Isobutane | Concentration slope |
0.6 | |
Standard Operating Conditions | Temperature : 20 2 Vc: 5.0V 0.1V Relative humidity : 65% 5% Vh: 5.0V 0.1V | ||
Warm-up time | No more than one hour | ||