Main Functions:

* Support Full I-TTL Pass-through function when on camera
* Shutter Sync ( the max. Sync. speed is 1/8000s )
* Remote Control Function
* Supporting mixed mode
* Work with Strobe Studio flash light in HSS function
* Awaking function
* Zoom Function
* Support Single-contact of camera and flash triggering ( the max. Sync. speed is 1/250s )
* Flash Fire Ratio with I-TTL
* Support 2pcs AA batteries, ( 1.2v rechargeable battery ), Stand-by time is 60hours.

Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on
the flash speedlite.

Note: There is a PC Sync port for YN-622N transceiver, you can use RF-602 PC / PC Cable to connect it with flash.

Nikon Model Suits for: 
Camera : The Nikon DSLR cameras with external flash control menu. Nikon D800E D800 D700 D300S D300 D200
D7100 D7000 D90 D80 D5200 D5100 D5000 D3200 D3100 D3000

Other Cameras: Canon, Pentax, Olympus, Panasonic, Fujifilm. For these cameras, only can use Manual mode and only
get 1/250s.

Flash compatible ETTL Flash: Yongnuo Flashes Nikon version: YN-568EX, YN-565EX, YN-500EX, YN-468II, YN-467II,
YN-465

Other Flashes: (Not support TTL function or HSS) YN-560III, YN-560II, YN-560EX, YN-560, YN-460II, YN-460

 

Canno Model Suits for: 
A: The EOS DSLR camera with external flash control menu:
Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D
650D 1000D 1100D
B: The EOS DSLR Camera without external flash control manual:
Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II
If you use the Canon Speedlite 430EX or 580EX (not mark II) or an older camera without the Flash Control menu then you will have to make settings by hand. Older cameras that don¡¯t have the same Flash Control menu include the original 5D, 10D, 20D, 30D, 300D, 350D, 1D and 1D Mark II.

Flash:
Compatible ETTL Flash: ( It suport wireless remote control through camera menu )
Canon 600EX ( RT ), 580EX II, 430EX II, 320EX, 270EX II
Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C ( Our yongnuo flash units don't support HSS Function )

Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters.