SWANS ANTI-FOG SOLUTION

(FOR SWIMMING GOGGLES)

TIPS: 

Once in a while, you could do a thorough cleaning of the internal part of the lens before you apply the anti-fog solution and the results will be satisfying.

Directions:

1) Clean the internal of the lens using mild soap to make sure any residue or dirt is removed.

2) Wipe off excessive water and air dry the goggles.

3) Apply your new coat of anti-fog solution to the lens internally. To make sure that the solution is evenly applied, please use your finger to spread the solution. 

4) Gently run the goggles through clean water to 'seal-in' the solution. Air dry your goggles before you store it. 

Note: Always remember, avoid touching the internal of lens as you will leave fingerprints and dirt on the anti-fog layer. Rinse your goggles in clean running tap water each time before and after use.  

 SA-30B

(WITH SPONGE TIP)

Feature: Sponge tip for easier application, just rub on

Volume: 15ml

Made In Japan

 SA-33B

(CONVENTIONAL SPRAY TYPE)

Feature: Spray on anti-fog solution

Volume: 15ml

Made In Japan

SA-56

Silicon Ear Plugs

Made In Japan