Item Descriptions:

size:

Qi charger (with receiver for iphone)

Product Features:

【Wireless Charging】

In case

It is not necessary to connect to the charging cable and you can charge it simply by placing equipment conforming to the wireless charging standard "Q i (Qi)".

Note: For smartphones that are not compatible with Qi, you need to place the receiver of the accessory on the back of the smartphone when charging.

【High quality chip】

With overvoltage protection, low voltage protection, short protection function, it is safe and can be used with confidence.

[With stability]

Non-slip rubber ring on both sides slip the main body on the desk.

In addition, the device is charged to the surface of the main unit stably.

【Easy to understand LED display】

The input is 5 V / 2A, the output is 5 V / 1A.

Charging status can be confirmed by LED indicator.

While the smartphone is charging, the LED light is lit in pale blue.

The green LED lights up red while waiting.

How to use the product:

1. Connect the USB to the connector under the main body of the charge board using the supplied USB cable.

2. Connect USB to PC and be ready, you can also charge from household outlet.

3. Charge the smartphone on the chargeboard and the charging will start.

Compatible models:

Major smart phones that support Qi "We are selling both ios and Andriod compatible products, so please be careful"

1, a model that can be charged directly (Qi reception card built-in)

· Iphone: iphone8 / iphone8plus / iphoneX

· Kyocera: TORQUE G 01 / TORQUE G 02 / URBANO L 03

· Panasonic: Eluga X P-02E / Panasonic QE-PL 202 / Panasonic QE-PL 302 / QE-CV 201

· Nexus: Nexus 4 / Nexus 5 / Nexus 6 / Nexus 7 (2013)

· Samsung: S6, S6 Edge, Note 5, S6 Edge Plus

- Sharp: SH - 07 D, SH - 04 D, SH - 02 D, SH - 13 C, SH - 09 D, SH - 04 E, SH - 06 E, SH - 05 D

· Fujitsu: F-03D, F-09D, F-03D Girls', F-10D, F-03E

· Nokia: 920/928/1520

· Motorola: Moto 360

· LG: D1L, LTE2

2, Qi model that needs to install the reception card

· IPhone: iphone 7, iphone 7 Plus, iPhone 6 Plus, iPhone 6, iPhone 5 s, iPhone 5 c, iPhone 4, iPhone 4 s

· Samsung: S5, S4, S3, Note 4, Note 3, Note 2

· Nokia: 1020, 925, 820, 720

· LG: G3

specification:

■ Input: 5 V / 2A

■ Output: 5 V / 1A

■ Output port: Micro USB

Charging efficiency: ≥ 73%

Transmission distance: ≤ 8 mm

■ Standard charge Wirless: Qi

■ Electric weight: 80 g

■ Material: Acrylic + PC + silicon

■ Operating Environment Temperature: 0 - 45 °

Acquisition certification: CE / FCC / RoHS

Package contents:

■ Qi wireless charger body "ios or Andriod"

■ Qi wireless charging receiver

■ microUSB cable

■ Japanese manual

please note:

■ Before you buy Please check if your equipment is Qi compliant.

If it does not correspond, please use it with the attached receiver or Qi compatible cover.

■ There is a possibility that charging may not be possible if the positional gap between the Qi receiver of the charging device and the charging coil of this product is large.

In that case, you need to adjust the position of the charging device.

■ If the thickness of the smart case exceeds 5 mm, it may not be able to charge well.

In that case, please remove the case and use.

In case

■ Some Qi receiver built-in smartphones rarely emit high heat when power is supplied.

In that case please refrain from using.

■ Please note that wireless charger does not touch water and other liquids.

Features:

• Please enter model number Confirm this is compatible:
• ✔ [Contactless charging] No trouble comfortable!
• If you comply with the wireless charging standard "Q i (Qi)" you can charge it by placing it on the charger.
• For iPhone X / 8/8 Plus / Galaxy S6 / S7 / S6 Edge / S7 Edge, Nexus 4/5/6/7 / LG G3 / other Qi compatible models just put on!
• ✔ 【With Qi charge card】 It does not matter if it does not correspond to Qi!
• iPhone and smartphone with Qi receiver iphone 7/7 plus / 6 plus / 6/6 s / 5/5 s / 5 c / 5 se and other IOS smartphones can also be charged just as comfortable!
• You can use it under the case.
• ✔ 【Safe Charging】 Highly charged coil and TI chip are adopted, and overcharge protection, overvoltage, low voltage, short protection function are available for high safety charging.
• Consumption during standby mode is also small.
• ✔ [Stability] Wireless charger, with anti-slip rubber on both sides.
• The size is about coaster, it does not get in the way on the desk, and it can charge firmly.
• (There are times when you can not charge if thick case is attached)
• ✔ [Easy to understand LED display] The output can be charged at 5 V / 1A.
• The state of charge is immediately understood with the LED indicator.
• The red lamp lights in the standby state, and the blue lamp lights while charging.
• We prepared Japanese manual of electronic version.
• If you wish, please contact us with your order number.

Product information:

Shipping Weight: 131 g

Package Dimensions: 3.99 x 12.90 x 13.21 cm