Works with ATT,T-Mobile 700MHz 4G LTE
Works with all cellular devices:Smartphones, Tablets, Data Cards, and Notebooks
Reduces dropped calls,improves the voice quality and faster uploads and downloads
Could covers about 2500 sq.ft in your home,office,villa,garage,basement and so on
FCC authentication certificate

Technical Details

Product Details

Package Dimensions
Width : 6.89 inch
Height : 5.91 inch
Length : 16.73 inch

Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B072LL8DKM

Product Description

1.Before order please make sure your mobile frequency is ATT or T-Mobile 700Mhz 4G LTE in your area.
2.It is better to determine the exact in different location until your phone could receive the best signal,then permanently mount the Outdoor Yagi Antenna.Keep the distance between the outdoor antenna and indoor antenna should be above 22ft and make sure a proper amount of physical separation between outdoor antenna and indoor antenna.These things are absolutely critical for this booster to work.

Operation Frequency:Band 12
Uplink:698MHz-716MHz,Downlink:728MHz-746MHz
Emission Designator:LTE(G7D)
AGC LEVEL:Uplink:-45.00 Downlink:-56.00
Max.Antenna Gain:Uplink:8.1dBi Downlink:6.6dBi
Power Supply:DC 5V from adapter
FCC Classification:B2W/Wideband Consumer Booster(CMRS)

Packing:
Signal Repeater Booster
Outdoor Yagi Antenna
Indoor Antenna
32ft 5D-FB OD7.5 Coaxial Cable
16ft 5D-FB OD7.5 Coaxial Cable
Power Adapter
Mounting Screw Kit
English User Manual

Guarantee:
FCC authentication certificate

Installation Guide:
1.Tightly connect the 32ft coaxial cable to the Outdoor Yagi Antenna
2.Check and find a place where your cell phone can receive the best signal outside your house,then mount the Outdoor Yagi Antenna and keep the outdoor antenna towards the cell phone signal tower
3.Mount the signal booster device somewhere inside the house,the repeater should be mounted in a place where is near from the power socket, and have good ventilation.
4.Tightly connect the 32ft coaxial cable to the OUTDOOR port of the repeater
5.Tightly connect the 16ft coaxial cable to the Indoor Panel Antenna and the INDOOR port of the signal booster.
6.Connect the Power Adapter to the signal booster.