Overview

• gadgeteer thinks highly of Mpow® Swift Bluetooth 4.0 Wireless Sport Headphones and highly recommends it.

• The Mpow Swift uses Bluetooth 4.0 technology with the aptX codec compression algorithm.
• Mpow Swift has “Signal Enhance Technology” which prevents skipping when the earbuds are blocked from the audio source by barriers such as your body. In practice, it seems to work as there are few complaints of skipping or losing signal. Mpow also advertises the Swift has CVC6.0 Digital noise reduction technology which filters outside noise increasing the clarity of calls and music. In practice, it works. Users are very impressed with call quality on both ends, and are amazed at the music playback quality for this price range. The microphone does not have any noise cancellation features.

Specification

• Bluetooth Standard Bluetooth V4.0
• Chips CSR8645 high-end chip from CSR Plc
• Frequency Range 2.4GHz
• Bluetooth Mode Headset/hands free/A2DP/AVRCP
• Operation Range Up to 30 feet
• Talk/Playing Time Up to 5 hours
• Standby Time Up to 185 hours
• Charging Time 2 hours
• 18-month warranty

What's in the box

• 1 x Mpow Swift Bluetooth Sport Headphones
• 3 x eartips (small, medium, large)
• 1 x micro USB charge cable
• 2 x indoor leisure fit stabilizer
• 3 x outdoor sport fit stabilizer
• 1 x User Manual

How to use

• Charging the headset

1.  You must charge the headset fully(more than 6 hours) before using the headset for the first time.
2. Connect the USB charging cable to the USB chargeport of the headphone.
3. The indicator light will turn into red when charging.
4. The full charge takes about 2 hours.
5. The red indicator light goes out and turn into bluewhen charging completed.

• Low-Voltage alert:

1. When the indicator turns into red and alert tone "battery low" sounds indicate that the battery has run out, need to charge as soon as possible.

• Power on/off the headset

1. Power on: Press the “MPOW” button about 3 seconds until the blue indicator flash. You will also hear the indication voice "Power On".
2. Power off: Press the “MPOW” button for about 3 seconds until the red indicator light flash and then goes off. You will also hear the indication voice "Power Off".

• Pair to your Smartphone

1. Press the “MPOW” button for about 5 seconds until the red and blue lights start flashing alternately. 
2. Turn on the Bluetooth function of your phone. Search for the Bluetooth devices and select "MPOW SWIFT” 
3. Enter the code "0000" if needed.
4.  If paring is successful, the blue light indicator starts flashing. You will also hear the indication voice "connected."

• Remark

1. Please make sure the headphone is off before pair.
2. It will connect to the pre-set phone automaticallywhen turns on. (Please make sure the Bluetooth function of your phone is on.)

• Connect two Bluetooth devices at the same time

1. Pair the Bluetooth headphone to the first phone.
2. After pair successfully, turn off the headset, and also disable the Bluetooth function of the first phone.
3. Pair the Bluetooth headphone to the second phone.
4. After pair successfully, turn on the Bluetooth function of the first phone. Select the "MPOW SWIFT" and click "connect".
5. Two phones will both connect the headphone at the same time.

• Answering a call

1. For iPhone users:
   1. Selection 1. Press the “MPOW” button.
   2. Selection 2. Press the “Answer” button of your iPhone and check your iPhone call menu. Look for the audio source and select the headphone "MPOW SWIFT".
2. For Android User (such as Samsung, HTC, Sony etc. ):
   1. Selection 1. Press the “MPOW” button.
   2. Selection 2. Press the “Answer” button of your phone.

• Ending a call

1. Press the “MPOW” button.

• Rejecting a call

1. Double press the “MPOW” button to reject call when the call is ringing.

• Redialing the last called number

1. Double press the “MPOW” button

• Muting the call

1. Double press the “MPOW” button to activate mute function when talking.
2. Double press the “MPOW” button to cancel the mute function when muting.

• Playing music

1. When you are listening to the music, you can press the buttons “Play, Pause, Previous Song, Next song” to select your optimal performance and control the volume.
2.  Play/Pause: Short press the MPOW button.
3. Next Song: Long press the button “ - ”.
4. Previous Song: Long press the button “ + ”.
5. Volume Up: Short press the button “ + ”.
6. Volume Down: Short press the button “ - ”.