Specifically designed to valve off the system to remove valve cores
Features a quarter turn ball valve shut-off fitting and O-ring seals
The valve core can be completely removed and replaced without losing system charge
Speed up evacuation, recovery or recharging time through the full flow port
Storage area houses spare valve cores

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 2.8 inch
Height : 1.4 inch
Length : 4.3 inch

Item Weight: 0 ounce (View shipping rates and policies)
Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B00FL6SR44

Product Description

JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All tees and crosses are tapped to receive an access core in all 1/4'' SAE flare ends. All pipe connections have internal braze cups for dip tube applications. All valves are equipped with cap and one valve core (braze type, loosely assembled). Temperature range -40 degrees to +250 degrees Fahrenheit (-40 to 121.1 degrees Celsius). Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkylates and diluted mineral acids.