1. Quality 1.2mm thick, high-endurance 304-grade stainless steel for rust, stain, and corrosion resistance, Solid Premium Grade-304 Connection base and spindle screws leads for a very long durability and lifespan.
2.The ladder style Square/Rectangle Flat Bar is finished in perfect smooth brushed stainless steel and has a length of 300mm/12inches , hole to hole distance 200mm/7.87inches , Cross-Section Diameter Front|Side : 30mm(1.18inches)|10mm (0.39inches) to fit most doors up to door thickness 2.36 inches.
3.All accessories (Allen wrench, spare set screws) included, very easy installation.
4. Each purchase comes as a PAIR of door pulls for inside and outside of a single door. For double doors, 2 pairs are required.
5. Applications: Entry/Entrance door handle, wood or glass door pulls, interior/exterior front doors, shops, shower bathroom, kitchen cabinets, gate, wine cellars, barn sliding door knob from small to large/big, please kindly note TOGU door handles/pulls itself do NOT lock and is used in conjunction with deadbolts hardware and/or door catches.

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 6.7 inch
Height : 1.5 inch
Length : 13.1 inch

Item Weight: 6.8 pounds (View shipping rates and policies)
Shipping Weight: 9.4 pounds (View shipping rates and policies)

ASIN : B01N6B3IRN

Product Description

Brand: TOGUHandle Material:100% 1.0mm thickness Premium Grade-304 Stainless Steel Connection base and spindle screws material:100% Solid German Standard Premium Grade-304 which will result in a very long durability and usage. Total length: 300mm / 12 inches Center-to-Center Mounting Distance:200mm/7.87inches Cross-Section or Diameter:Front|Side : 30mm(1.18inches)|10mm (0.39inches) Finish:Full Brushed Stainless SteelDoor Type: Mountable on all types of doors including but not limited to glass and wooden doors, works up to 2.36 inches door thickness. Note: Each purchase comes as a PAIR of door pulls for inside and outside of a single door. For double doors, 2 pairs are required.Steps for Installation: Drill and create two end to end holes between 0.315 - 0.600 inches (0.375 is recommended) on the door with a Center-to-Center Mounting Distance. Use the Hexagonal Allen wrench to lose the hex socket set screws in the top and bottom pull connection base, remove apart the inner side and outer side of the door pulls. Put the inner side pull handle and outer side pull handle aligning at each other and tighten the 4 pieces of the hex socket set screws in the top and bottom pull connection base. This completes the installation process. Description : Limited Lifetime Replacement