I will dare say selfishness.

Thank you for making SDF-1 of pure TV version of Macross in this era. So we do not hesitate to purchase and display it with other macross goods. But, if you see it all the time, you can not deny the cheap feeling ... If you dare to say hope (selfishness). I wonder if you can make a TV version with the same quality as the 1/5000 theater version released by Wave. I will buy the price somewhat higher. Because there will be no demand compared with the movie version. But I think that there are not a few people who rage crazy. Including me.

Some instructions are incorrect.

I bought this series for the first time. The painting was fine but it was faint at the shoulder secondary cannon part and the shin yellow stripes. The fact that I was concerned is that the explanation of the assembly was partially incorrect, because the manual did not know the procedure how to remove the parts first with one piece of paper. Although it is an antenna part on both sides of the bridge, in the manual, the shape of the mounting base is notation such as pairing the convex type and the L type one by one and putting it on the left and right, but in fact the convex mutual It is designed to fit to the side of a fortress type bridge. Furthermore, if you move it to make it a launching regime of a strongly typed main gun, it interferes with the antenna. If it interferes beforehand, I want you to make it with soft parts beforehand and take countermeasures. I also wanted the makeup parts to cover the cover with just the shoulder and the upper part of the thigh. Looking at the joint from the top it is all round. It is not good as toy for deformation, movement. Postscript I made it a forcible type and decorated it with a stand on the side of the desk, but when I tried it on the shelf, I noticed that this was adjusted to a balanced appearance when I display it with a looking up feeling . It is quite modern as a display model.

Antenna care

If you look carefully from the modeler's point of view, there are roughs, but it seems to be an unproblematic part for finishing out like a finished product like a toy and quickly decorating it. The size was roughly the same as what was previously released from the wave. The main gun and legs are slightly shorter here, but the torso is about the same size. As an attention point, there are antenna parts for fortress ship and forcibly type, so let's check the root when installing. If you keep attaching this part, you will not enter the package (inner box), so I think that it is better not to bond etc. in case you want to get it even after purchase. In packages and sample photos, the round parts beside bridge bridge look like clear material, but the product is ordinarily painted to the same material as other parts in the product. Since the coating of each part seems not to be so strong, I felt it rubbed off easily at the time of recombination and it was easy to peel off.

If you are a Macross fan!

This is a good one! Wave is too expensive! Besides, it's an anime. If you remodel it will be even better!

Overall somewhat thin

It is a Macross ship thought that there is no new product anymore, but I bought it because something that I can buy at a fairly affordable price came out. For Cosmo Fleet, it can be said that it is big for disqualification, but like Yamato etc something is thin overall. I wonder if Daedalus was so slender, is the setting actually quite thin? The main engine is just a square. Well, the setting may be so, but not everyone has a nozzle on Plamo. I wanted you to put on something once because it looks very crappy. As you all say, I think that it could be perfectly deformed if it was this size, on the other hand, I think that seams for deformation will stand out considerably. Oh well, it is not a big deformation mechanism unlike Valkyrie, so I guess this is OK with this. It seems to be a big disadvantage to lose parts for deformation. .

Unfriendly TV version

The proportion is also good and I can express the atmosphere of the TV version Macross well with the minimum necessary mold. The strong type is an atmosphere similar to the 1/8000 Plamo of the former Imai company, and it seems that if the company had released 1/8000 fortress ship when watching the fortress ship, it would make me feel like it was such feeling. Regarding transformation deformation, it is easy to do except for the points where the legs are difficult to pull out during fortress → battle, and the main gun slide slightly interfere with the main gun on the shoulder top. Rotary axis moving parts (2 places) of each block of the main gun have no inrush inside, and position adjustment is necessary when it is a bumpy type. Daedalus front hatch on the back side with subtle lightening, Prometheus screws are exposed only on the right side of the rear side, upper part of the legs at the time of bullying (closely attached at the time of the fortress ship) As if I forgot the opening, the white crotch axis inside is full. Daedalus, the bridge of Prometheus has been completely abbreviated. Since the movable shaft by caulking and the pinching rotation axis are concentrated from the shoulder to the elbow, Daedalus and Prometheus may not be beautifully horizontal with respect to the macross body at the time of a fortress ship due to individual differences. The bridge part of the burglar type and the fortress ship was slightly tilted to the left or right to be bonded to the right or left (I put a lot of effort on picking with the fingers, but since it was easy to disengage, I reattached at the best position ). The movable part of the elbow from the shoulder is a thin part, but the caulking treatment has been done to two places and it looks like it is visible so it looks a little disappointing in appearance. Although the metal tube of the caulking is slightly laid out in both the front and back, it seems that the joint strength will not be kept if it is easy to flatten. Although the ankle moves for the ground or moves to the left and right, it does not move forward and backward, the knees are not movable, the crotch opens only at the left and right and does not open in the character of Ha. Since the display pedestal has a diameter of 12 cm, the tiny one may get in the way a bit. Regarding coloring, unique color navigation blue color other than the unique color scheme of the TV version has been reproduced. Personally I wrote a lot of satisfied TV version of Macross, than the thing which is not perfect deformation, the joyfulness that the TV version was commercialized surprised and it bought two for each form.

Finally Daedalus Attack

The proportion is also good and I can express the atmosphere of the TV version Macross well with the minimum necessary mold. The strong type is an atmosphere similar to the 1/8000 Plamo of the former Imai company, and it seems that if the company had released 1/8000 fortress ship when watching the fortress ship, it would make me feel like it was such feeling. Regarding transformation deformation, it is easy to do except for the points where the legs are difficult to pull out during fortress → battle, and the main gun slide slightly interfere with the main gun on the shoulder top. Rotary axis moving parts (2 places) of each block of the main gun have no inrush inside, and position adjustment is necessary when it is a bumpy type. Daedalus front hatch on the back side with subtle lightening, Prometheus screws are exposed only on the right side of the rear side, upper part of the legs at the time of bullying (closely attached at the time of the fortress ship) As if I forgot the opening, the white crotch axis inside is full. Daedalus, the bridge of Prometheus has been completely abbreviated. Since the movable shaft by caulking and the pinching rotation axis are concentrated from the shoulder to the elbow, Daedalus and Prometheus may not be beautifully horizontal with respect to the macross body at the time of a fortress ship due to individual differences. The bridge part of the burglar type and the fortress ship was slightly tilted to the left or right to be bonded to the right or left (I put a lot of effort on picking with the fingers, but since it was easy to disengage, I reattached at the best position ). The movable part of the elbow from the shoulder is a thin part, but the caulking treatment has been done to two places and it looks like it is visible so it looks a little disappointing in appearance. Although the metal tube of the caulking is slightly laid out in both the front and back, it seems that the joint strength will not be kept if it is easy to flatten. Although the ankle moves for the ground or moves to the left and right, it does not move forward and backward, the knees are not movable, the crotch opens only at the left and right and does not open in the character of Ha. Since the display pedestal has a diameter of 12 cm, the tiny one may get in the way a bit. Regarding coloring, unique color navigation blue color other than the unique color scheme of the TV version has been reproduced. Personally I wrote a lot of satisfied TV version of Macross, than the thing which is not perfect deformation, the joyfulness that the TV version was commercialized surprised and it bought two for each form.I am satisfied because I wanted a nostalgic TV version. Daedalus Attack can be put in it with this.

When things new go out,

TV version Macross is only the product at that time, there is no new one, it is a long-awaited commercialization. The box will be a tribute to the big macross of former Takatoku, but it is wasteful. Considering the expensive price, it seems that it is producing a high-priced feeling by just adding a box even with a box. Can not you imagine getting in the way? Manufacturers should learn about the housing situation in Japan. What I thought about holding it was quite plastic texture. I thought that more PVC is being used but it was nice to keep it. The size is bigger than the former 1/8 thousand plastic, and it feels a little smaller than WAVE's theatrical version deformed toy. Deformation is pheasant, but in a stubborn type, the chest width is too wide and it is a deep body type. To replace the entire body, the proportion is bad for waste. In this case, it would be fun to deform only the legs and bridge bridge with one body, and the deformation is also pleasant, the proportion is good, the boss may become cheap. I do not think you are the person seeking detail, but the details are quite shabby. Since when was Macross that has no Prometheus bridge? It is far from satisfactory, but not bad as it makes me sick. Moreover, if it is new and deformed macross ship comes out, it bought it, it is a thing of such degree that this is unnecessary.