Item Descriptions:

Color:

iPhone X Blue

★ Blue light cut function

【Blue Light Cut Function】

Advanced Blue Light Cut Reflective technology can greatly cut blue light, reduce burden on the eyes and demonstrate to those watching the display for a long time Prevent pigmentation, protect eyes from blue light, reduce myopia

I will.

【Fingerprint hard to attach】

High durability Anti-fouling coating makes fingerprints and dirt resistant.

Even if it adheres it can be wiped off easily.

Always beautiful screen and smooth operation can be obtained.

★ 3D Round Edge Processing

【Comfortable touch feeling】

The thickness of only 0.33 mm does not damage touchscreen reaction.

It is an iPhoneX protection film with excellent operability that realized the slipperiness of fingers by oil processing of the surface.

【3D Round Edge Processing】

The rounded edge of the glass edge provides a smooth touch, 3D round edge processing makes it harder for side impacts.

★ Paste method

For pasting, please refer to related videos of review and youtu.be https: // youtu.b / eyLFcCsk 9 bQ.

【Pasting method】

Wipe the LCD screen with alcohol sheet first, then cross with wipe, please remove fingerprints and dirt.

Please remove the remaining dust with a dust sticker.

Please check the parallel of the film and the LCD screen, the position of the speaker for the call etc and place the film slowly on the LCD screen.

★ notes

If bubbles enter, please push out with the finger from the center to the outside

Peel off the front sheet, wipe the LCD screen again with a cloth, finish it with the glass comfortable

※ ※ Please read the following notes before placing the film.

Question (1): How can I prevent dust from being mixed in when pasting a film?

Cause: Dust is floating in the air, or if dirt, fingerprint, etc. on the liquid crystal screen remain, dust is likely to enter.

Correct operation method: Before sticking the film, please remove the dirt and dust on the liquid crystal screen thoroughly and clean it by using alcohol pad and micro fiber cross, and dust removal seal.

When peeling off the protective sheet (tab 1) so that dust does not stick, peel off with the film pasting side facing down to the liquid crystal.

Question 2: How can we eliminate bubbles, floats, etc.

Cause: When sticking the film, bubbles will be generated when the film is distorted, dust enters, or the pressing force is not uniform.

Correct operation method: By aligning the position of the liquid crystal screen and pressing it with your fingers, you can stick it cleanly with a single shot, but if bubbles or floats occur a little, wrap the spatula or cloth for bleeding out with a finger and push it little by little, bubble

You can pull out.

If bubbles still do not push out, you can peel off the glass film slowly and reapply it if you turn from the edge.

Question 3: When crimping, crack?

Aerated?

Is the edge floating?

Cause: Since the material of the film is glass, the force of peeling and sticking is unbalanced, and when the flicking occurs, cracks, bubbles entering, and the edges may float due to nail contacting the adhesive surface.

Correct operation method: When repositioning, please carefully push up the end carefully with the nail and peel off.

(In order to eliminate floating by pasting again, please take care not to touch the adhesive side of the film when peeling off.)

I also peel all the glass film slowly without panic.

(* It is a point to peel off the whole film rather than peeling off some films.)

Finally, align the position and load the film.

Features:

• Please enter model number Confirm this is compatible:
• [Applicable model] It corresponds to iPhone X
• 【Blue Light Cut】 Function Advanced Blue Light Cut It is possible to cut blue light drastically by reflection technology, reduce the burden on the eyes, and show the effect to people watching the display for a long time.
• 【3D reinforced glass film whole surface】 With 3D Round Edge Craft, the touch reaction is good, it is a very smooth operation feeling.
• Also, unlike conventional protective films, the type that protects the entire cell phone including home buttons and curved surfaces.
• 【High sensitivity touch compatible】 Have an excellent window display, smooth fingers, comfortable operation with good likability.
• Ultra thin thickness 0.3 mm, very thin glass was adopted, and it was hard to receive impact from the side by round edge processing.
• [Precautions] Please read the pasting method well.
• The instruction manual is written in English only.
• Thanks for your understanding.

Product information:

Shipping Weight: 99 g

Package Dimensions: 5.69 x 15.70 x 20.40 cm