PLS Attention:
1.New function: There are emergrncy hammer and blade for help in the case of the car is drop of the river and Oceansea.
2.The jump starer support both 12V Gasoline vehicles
Product Description:
Capacity: 50800mAh
Output: 12V=2A / 16V=3.5A / 19V=3.5A
USB Output: 5V=2.1A outlet
Charger Model: CC/CV 12.8V 1A
Input: CC/CV 12V=1A
Start Current:300A
Peak Current: 600A (3S)
Battery Life: Exceed 3000 times or more
Operating Temperature: -45~85 Degree
Dimension:165mm*79mm*40mm
Master switch
Switchable Voltage 12V/16V/19V
LED illumination light
19V voltage output indicator light
16V voltage output indicator light
12V voltage output indicator light
Used For:
Car, mobile phone, PSP, MP3/MP4/MP5,Tablet PC, PDA,Camera etc.
1: Car emergency start charging,Enhanced 12V Petrol Version.Petrol Car Generic Version.
2: Mobile phone&Digital Product Charging
3:SOS Flashlight
Operation Instructions for Staring Car Engine:
1.Before start the car,please make sure the hose minimum 3 LED indicated light on,then connect the blue plug fully seated into the host socket, and confirm the cable indicator is off.
2.Connect the Red clip to the positive(+)battery terminal, Black clip to the negative(-)battery terminal.
3.Start the vehicle.
4.When the vehicles starts, please make sure pull up the clamp cable from power bank and then from
the car battery . Please do not connect the red and black clip to the vehicle battery terminals
more than 30s.
Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the
cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when
your device is full-charged.
4, During the charging for your device, LED lights indicate the balance power of built-in battery of
EPOWER. Four lights indicate 80% balance, three lights indicate
60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in
battery is empty when all LED lights start to flash.
5, Press the switch five seconds to start If you want to use LED for illumination and select the
status ( light, strobe, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
Car Jump Starter Highlights:
1.Dual USB Interface
2.For Petrol Cars
3.WIth Saftey Hammer Inside blade can cut seat belt
50800mah Car Jump Starter Functions:
Car, mobile phone, PSP, MP3/MP4/MP5,Tablet PC, PDA,Camera etc.
1: Car emergency start charging,Enhanced 12V Petrol Version.
2: Mobile phone & Digital Product Charger
3:SOS Flashlight
4.Livesaving tools: safety hammer function, inside blade can cut safety belt when there is danger.
50800mah Car Jump Starter Specifications:
Model Name: Enhanced 12V Petrolic Version
Capacity:50800mAh
Dimension: 160mm*75mm*28mm
Output: 12V=2A 16V=3.5A 19V=3.5A
Start current: 300A
Peak current: 600A(3S)
USB Output: 5V=2A
Cycle Life: 3000 times
Charger Mode: CC/AC 12.6=1A
Using temperature:-45~85 Degree
Package: Plastic box
Master switch
Switchable Voltage: 12V/16V/19V
Operation Instructions for Staring Car Engine:
1.Before start the car,please make sure the hose minimum 3 LED indicated light on,then connect the blue plug fully seated into the host socket, and confirm the cable indicator is off.
2.Connect the Red clip to the positive(+)battery terminal, Black clip to the negative(-)battery terminal.
3.Start the vehicle.
4.When the vehicles starts, please make sure pull up the clamp cable from power bank and then from
the car battery. Please do not connect the red and black clip to the vehicle battery terminals
more than 30s.
Car Jump Starter Instructions For Use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the
cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when
your device is full-charged.
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash.
5, Press the switch five seconds to start If you want to use LED for illumination and select the
status ( light, strobe, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
50800mAh Car Jump Starter Package List:
1 x 50800mAh 12V Version Power Bank for Petrol Cars
1 x Home Power Plug
1 x car charger (vehicle cigarette lighter cable)
1 x laptop charging cable
8 x laptop connector
1x 4-in-i mobile phone adapter
1 x Storage Battery Wire Clip
1 x English user manual(Data Sheet)
1 x Plastic Box
Car Jump Starter Cautions:
To avoid from accidents,make sure note the following cautions.
1:Take off the main unit within 30 seconds after starting the car.
2:Don't clip the two terminals at the same end on the battery.
3:Don't Disassemble the unit.
