Fast and easy to use: insert and heat then complete.
Cost effective: 120PCS, include 40 Red, 40 Blue, 30 White, 10 Yellow.
Easy to identify: Specific color for Specific size, easy to pick up for use.
Waterproof and Insulated: widely used for marine and automobile.
High Quality - Comply with all relevant European standards; Shrinking ratio: 2:1

Technical Details

Product Details

Package Dimensions
Width : 3.82 inch
Height : 0.98 inch
Length : 7.09 inch

Shipping Weight: 4.8 ounce (View shipping rates and policies)

ASIN : B073RMRCC3

Product Description

Specification:?
Shrinkage ratio is 2:1?
Temperature Start to shrink: 80℃?
Temperature iron start to melt: 138℃ Feature:
1.Waterproof: Each end comes with waterproof hot melt adhesive, which shrinks tightly on the wire when heated and hence protects the wire against corrosion by invading water;
2.Insulation protection: Used to seal off wire connections, avoiding electric leakage and saving circuitry from rodent nuisance;
3.Transparent outer tube for easy inspection: In repairing, the wire repair result can be observed through the transparent heat shrink tube;
4.The solder ring, when heated, melts and flows into the wire connection, effective in preventing the connection from breaking.
How to use:?
1.Run one wire through the butt connector tube of appropriate size, have the wires connected and treated properly, and move the connector such that the solder ring section is aligned with the wire connection;?
2.Heat both ends of the tube using a heat gun so that they shrink. The waterproof rings when heated turns into waterproof rings;?
3.Heat the solder ring with a heat gun until the ring melts and penetrates into the wire connection;
Warning:Heat the heat shrink tube section until it shrinks tightly around the wires; excessive heating will melt down the heat shrink tube completely. The solder ring must be heated to a full melting so as to penetrate into the wire connection.

Package Include:?
1.30xWhite Connectors: Diameter 1.7 mm, able cross-section 0.25-0.34 mm²(A.W.G.:26-24);?
2.40xRed Connectors: Diameter 2.7 mm, Cable cross-section 0.5-1.0 mm²(A.W.G.:22-18);?
3.40xBlue Connectors: Diameter 4.5 mm, Cable cross-section 1.5-2.5 mm²(A.W.G.:16-14);?
4.10xYellow Connectors: Diameter 6.0 mm, Cable cross-section 4.0-6.0 mm²(A.W.G.:12-10).