u0026nbsp;
Description
Dry paste installation method:
1. Clean the body and keep it dry.
2. To determine the need to paste the location. Under normal circumstances, slowly side of the paste, while scraping with a tool, while the end of the paper.
3. If the graphics are not large, but also transparent transfer film and stickers all tear off and then paste. But be careful not to accidentally stick.
4. After the paste, and then repeated scratch several times. Remove the transparent transfer film.
5. In the door and sewing with a knife knife knife, inward paste.
6. Do not let the car stick and the body have any separation or protrusion.
u0026nbsp;
Wet paste installation method:
Tools: wipes, sprinkler, scraper or credit card
1. Clean the body, in the body parts will be posted on the uniform water - to reduce the sticker viscosity, easy to adjust the location.
2. To determine the need to paste the location. Slowly side of the paste, while gently scraping with a tool, while the end of paper.
3. Encountered door handle or anti-rubbing bar according to the situation to cut the material and included.
4. Appropriate adjustment, the graphic position to determine the correct, forced repeatedly scraping water and bubbles. Remove the transparent transfer film.
5. In the door and sewing with a knife to draw a knife, inward package service.
6. Do not let the car stick and the body have any separation or protrusion.
7. As far as possible in the car stickers in the water dry, the conditions can be moderate heating and drying. According to the weather, after a day or two after the car wash.
u0026nbsp;
In order to reduce the difficulty of customer installation, we provide the car stickers have been covered in advance transfer film. (Except for block continuous graphics)
u0026nbsp;
How to clear:
With a nail gently pull the edge of the stickers, and then tear the whole, will not leave marks will not hurt the paint. Winter if the cold can not be scraped corners, hair dryer can be used to properly heat the glue, gel soft can be easily removed after the soft.
u0026nbsp;
Note:
1. In the decision to dress up a week before the car do not wax, wax stickers sticky sticky; film can not be hot when the car posted, you must wash the car, paste a week after the car can not be washed, after the proposed 24 hours Do not be exposed; car stickers paste after three days do not car wash, do not stick in the rainy days, so the effect will be bad
2. Such as stickers need to be posted on the door or other activities need to place, do not worry, paste it with a quick knife can be cut.
3. If you really do not want to start, please go to the local place to ask for help.
u0026nbsp;
Details Display
u0026nbsp;