【Name】: car repair

【Features】:

◆ simple operation, directly for your quick return dent.

◆ free paint repair, do not destroy the original paint, fast and environmentally friendly.

◆ three different sizes of traction gasket, suitable for all sizes of dent.

◆ suitable for automotive surface sheet metal, refrigerator, washing machine surface sheet metal.

◆ suitable for a variety of flat metal concave place to use.

1, with a clean damp cloth to clean the dent part;

2, the hot melt adhesive rod from the hot melt glue gun behind the load, pull the trigger, so that glue rod into the glue gun, plug in the power, so that glue gun preheat 5 minutes;

3, to find a suitable traction gasket (large dent need to use a large traction gasket; (Note: the greater the traction pad, pulling the greater the pull);

4, pull the plastic gun trigger, with the extrusion of plastic coated with the selected traction gasket (gasket 4 holes are also painted hot melt

u0026nbsp;5, quickly covered with hot melt adhesive traction gasket on the central part of the dent, gently press until the hot melt curing sticky; (hot melt adhesive to dry for about 8 minutes; we recommend not to heat Melt the air to dry the time not more than 10 minutes)

6, the traction tension bridge in the middle of the hole aligned with the traction gasket rod, the screw rotation button set in the traction gasket, slowly tighten until the dent part of the surface with the surrounding flush can be The

7, some dent, may need to repeat the above steps several times in order to repair the dent.

8, if the surface is raised a little raised, please follow the following steps: first with the thumb back and forth rubbing the raised point until the raised point with the other surface as flat; if you can not use the thumb to restore the starting point, Tap the stick (gesture of the pen) Gently click on the raised point until the raised point is flattened. Sometimes it may take several times to repeat. (Note: when using the hammer, can not force too much)

9, dents repair, unscrew the screw rotation button, remove the traction pull the bridge, and then remove the traction gasket, if there is hot melt adhesive on the surface of the car body, let the hand gently tear can be.

1, with a clean damp cloth to clean the dent part;

2, the hot melt adhesive rod from the hot melt glue gun behind the load, pull the trigger, so that glue rod into the glue gun, plug in the power, so that glue gun preheat 5 minutes;

3, to find a suitable traction gasket (large dent need to use a large traction gasket; (Note: the greater the traction pad, pulling the greater the pull);

4, the trigger rubber gun trigger, with the extrusion of plastic coated with the selected traction gasket (gasket 4 holes are also painted hot melt adhesive); (Figure 1)

5, quickly covered with hot melt adhesive traction gasket on the central part of the dent, gently press until the hot melt curing sticky; (hot melt adhesive to dry for about 8 minutes; we recommend not to heat Melt dry time should not be more than 10 minutes; winter drying time is slightly shorter.) (Figure 2)

6, the traction tension bridge in the middle of the hole aligned with the traction gasket rod, the nut knob set in the traction gasket, and slowly tighten until the dent part of the surface with the surrounding flush can be flush; (Figure 3 below)

7, some dent, may need to repeat the above steps several times in order to repair the dent;

8, if the surface is raised a little raised, please follow the following steps: first with the thumb back and forth rubbing the raised point until the raised point with the other surface as flat; if you can not use the thumb to restore the starting point, Tap the stick (gesture of the pen) Gently click on the raised point until the raised point is flattened. Sometimes it may take several times to repeat. (Note: when using the hammer, can not force too much)

9, dents repair, unscrew the nut knob, remove the traction pull the bridge, and then remove the traction gasket, if there is hot melt adhesive on the surface of the body, let the hand gently tear can be.