| Brand | Getech |
| Model | DPB-06647 |
| Quantity | 1 Piece |
| Color | Red |
| Material | CCL+PCB board |
| Chipset | Sanguinololu ATMEGA644P |
| English Manual / Spec | Yes |
| Download Link | http://www.geeetech.com/wiki/images/3/33/Melzi_Schematic.pdf http://www.geeetech.com/wiki/images/5/5b/Melzisilk.pdf |
| Other Features | Description: A compact all-in-one controller board for RepRaps with one extruder head、 optimized for mass production.The point of RepRap is to make itself、 of course. But sometimes people just want plug-and-play RepRap electronics so they can concentrate on the other aspects of the machine、 or just because they are more software or mechanics oriented than electronics oriented.The Melzi Ardentissimo is a full-featured Melzi board using the ATMEGA644P OR ATMEGA1284P chip used on Sanguinololu. Melzi is designed to be a complete set of RepRap electronics. It is based on the Arduino Leonardo (Francesco Melzi was Leonardo's pupil).This is a Sanguinololu firmware compatible board、 though does have a couple of extra features the Sanguinololu does not - namely the extra Mosfet for the fan、 and a software controllable LED.Melzi has micro SDMaximum support 2GB on board as well. A full StepStick clone is on board as well negating the need for external stepper motor drivers.Specifications:This is a complete electronics control board for RepRap 3D PrintersThe main chip is ATMEGA644P、 you can choose ATMEGA1284P insteadStepper Motor Driver integrated chips is A4988Gen7 Arduino IDE Support InstallationGen7 Arduino IDE Support Bootloader UploadIntegrated micro SD card socket |
| Packing List | 1 x Getech Melzi Ardentissimo All-in-one Controller Board |
Dimensions: 8.54 in x 1.97 in x 0.47 in (21.7 cm x 5.0 cm x 1.2 cm)