Description
<br />Parameter: 
<br />Material: aluminum alloy and acrylic 
<br />Power: 80W 
<br />Voltage: 24VDC 
<br />Speed: 0-8000 r / min, 7-gread speedby voltage 
<br />Size: 355* 60 * 85mm 
<br />The theoretical maximum turning diameter: 70mm 
<br />The theoretical maximum clamping length: 180mm 
<br />Chuck clamping range: 0.6-6mm 
<br />
<br />Power 
<br />Input:AC110V- 240V~50/60Hz 1.5a max 
<br />Output:12/15/16/18/19v 4.5A max 
<br />20/24v 4A max 
<br />Overall length:1.1m1.1m 
<br />
<br />Features: 
<br />High-precision, stability, low noise; 
<br />Designed for the home DIY enthusiasts, csmall and portable, strong power; 
<br />Transparent plexiglass shield, super convection cooling holes; 
<br />Large torque ball bearing motor. 
<br />
<br />Precautions: 
<br />1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations. 
<br />2.The speed can be adjusted in 0-8000R, cut wood should not exceed 4000, grinding can use higher speed. 
<br />3.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut. 
<br />4.If not a cylinder, the speed should be reduced. 
<br />5.Tailstock bearing without lock tight. 
<br />6. When using a knife, locking the bottom of screw, location should be awaytimber 1-1.5cm. 
<br />7.If you do not really understand the operation, it is best to consult a professional person. 
<br />
<br />Package include：
<br />1×Beads hine Polisher
<br />1×Red sandalwood turning tool
<br />1×Key type drill chuck 
<br />1×12-24V seven speed Power Adapter
<br />1×Abrasive paper disc
<br />1×Tungsten steel beads pin 
<br />1×Aluminum alloy saw blade slot 
<br />3×Rounding tool 12mm/18mm/22mm
<br />1×Diamond saw blade 50mm
<br />1×Diamond saw blade connecting rod
<br />6×Abrasive paper  80×2/240×2/600×2
<br />1×High-speed steel saw blade 50mm
<br />1×High-speed steel saw blade connecting rod
<br />10×Abrasive paper 5000×10
<br />2x Screws 
<br />2x Drill bits
<br />