Our Advantages 
Fast delivery (Receive item within 4 working days) 
Long warranty: 3 years 
Money back free within 30 days
About Beacon LED Lighting
Beacon LED Lighting Pte. Ltd. is headquartered in Singapore. We design and produce indoor LED lighting products such as bulbs, candle lights, tubes, circular tubes, and down lights, etc. Over the years, we have leveraged extensively on the research capabilities of universities to improve heat dispersing materials and LED chip package technologies. Thus, our special materials and newest chip package technology enable our LED lighting products to have high luminous efficiency up to 140 lumens per watt. This performance is 50% higher than the average light efficiency of similar products in the market.
 
Features
● Extremely long life: More than 40,000 hours.
30 times longer than incandescent and 5 times longer than energy saving lamp.
● High efficiency: Electricity consumption is below 10% of incandescent lights.
● High lighting effect: Up to 100 lumens per watt for the whole lamp.
● Environment friendly: Mercury free, lead free, no UV, no IR, no flicker, no hazard to health
● No ballast and starter, turn on and off instantly.
Applications
● Direct replacement for traditional lamp such as fluorescent tube without ballast and starter.
● Widely used in any indoor places such as office, residential building, school, shopping mall, car park, restaurant, hotel, factory, library etc.
Production Specifications
 
Item No Watt(W) Voltage (VAC) CCT (K) Lumens (lm) Lighting Effect (lm/W) Lifespan(hrs) Base CRI (Ra) Power Factor Size(D*L) (mm) Beam Angle(°) Dimmable N.W.(g) Material Warranty (years) Replace Fluorescent 2G11 (W) Saving Electricity Cost Per year* (S$)
T8Y08DGNA01 8 220 6000 1040 130 40,000 G13 >70 >0.8 Φ26*588 180 No 225 PC(Frosted) 3 26 24
T8Y08WGNA01 8 220 3000 960 120 40,000 G13 >70 >0.8 Φ26*588 180 No 225 PC(Frosted) 3 26 24
T8Y16DGNA01 16 220 6000 2080 130 40,000 G13 >70 >0.8 Φ26*1198 180 No 380 PC(Frosted) 3 53 50
T8Y16WGNA01 16 220 3000 1920 120 40,000 G13 >70 >0.8 Φ26*1198 180 No 380 PC(Frosted) 3 53 50
T5Y04DGNC01 4 220 6000 380 95 40,000 G5 >70 >0.50 Φ15*310 120 No 110 AL+PC(Frost) 3 8 5
T5Y04WGNC01 4 220 3000 320 80 40,000 G5 >70 >0.50 Φ15*310 120 No 110 AL+PC(Frost) 3 8 5
T5Y06DGNC01 6 220 6000 570 95 40,000 G5 >70 >0.50 Φ15*571 120 No 170 AL+PC(Frost) 3 13 10
T5Y06WGNC01 6 220 3000 480 80 40,000 G5 >70 >0.50 Φ15*571 120 No 170 AL+PC(Frost) 3 13 10
T5Y10DGNC01 10 220 6000 950 95 40,000 G5 >70 >0.90 Φ15*871 120 No 240 AL+PC(Frost) 3 21 15
T5Y10WGNC01 10 220 3000 800 80 40,000 G5 >70 >0.90 Φ15*871 120 No 240 AL+PC(Frost) 3 21 15
T5Y13DGNC01 13 220 6000 1235 95 40,000 G5 >70 >0.90 Φ15*1171 120 No 320 AL+PC(Frost) 3 28 20
T5Y13WGNC01 13 220 3000 1040 80 40,000 G5 >70 >0.90 Φ15*1171 120 No 320 AL+PC(Frost) 3 28 20
T8Y10DGNC01 10 220 6000 1000 100 40,000 G13 >70 >0.90 Φ26*588 120 No 152 PC(Frosted) 3 18 11
T8Y10WGNC01 10 220 3000 800 80 40,000 G13 >70 >0.90 Φ26*588 120 No 152 PC(Frosted) 3 18 11
T8Y15DGNC01 15 220 6000 1500 100 40,000 G13 >70 >0.90 Φ26*893 120 No 225 PC(Frosted) 3 28 18
T8Y15WGNC01 15 220 3000 1200 80 40,000 G13 >70 >0.90 Φ26*893 120 No 225 PC(Frosted) 3 28 18
T8Y20DGNC01 20 220 6000 2000 100 40,000 G13 >70 >0.90 Φ26*1198 120 No 300 PC(Frosted) 3 36 22
T8Y20WGNC01 20 220 3000 1600 80 40,000 G13 >70 >0.90 Φ26*1198 120 No 300 PC(Frosted) 3 36 22
 
  
Dimensions                                                           Illuminance Cone Diagram
 
 
Note: Easy for replacement! the installation of our LED T5 tube is as the same as the fluorescent T5 tube.
Energy Efficiency
 
Item Beacon Super Bright 16W LED T8 Tube Beacon Normal Bright 20W LED T8 Tube 36W T8 Fluorescent Tube Unit
Tube wattage 16 20 36 W
Ballast wattage No No 7 W
Total wattage 16 20 43 W
Electricity consumption per year per unit(24 hours per day) 140 175 377 kWh/year
Annual electricity charges per tube (kWh rate of  S$0.31) 43 54 117 S$
Annual saving energy cost per tube 74 63 S$
Annual saving energy coast per 1000 tubes 74000 63000 0 S$
Lifespan 40,000 40,000 8000 hours
Unit Price of Lamp 45.6 35.5 4 S$/PCS
Lamp quantity for 40,000 hours 1 1 5 PCS
Lamp Cost for 40000 hours (without installation fee) 45.6 35.5 20 S$
Lamp cost + electricity cost for 40,000 hours per unit 242 282 554 S$
Total saving cost for 40,000 hours for 1000 Tubes in your place(S$)  312000 272000 S$
 
Comparison of Production Specifications and Costs

Beacon VS Philips 

36W philips 4 feet T8 three-band fluorescent tube 16W Beacon 4 feet T8 LED tube
Voltage 221.1V    221.3V
Wattage 40.5W  14.77W
CCT（Tc) 5666K 6187K
CRI（Ra) 80.1 73.7
Power Factor 0.5024 0.8517
Lighting Effect 51.39lm/w 124.0lm/w
Lumens 1985.4lm 1830.9lm
Peak Intensity 472.17cd 478.72cd
Half-Intensity Angle 118.8° 140.4°
Beam Angle 169.2° 180.0°
Flash Area（76°） 873cm2 873cm2
 
 
 
Return Policy-30 Days No Questions Asked
Return Period
Within 30 days of the initial ship date for all lights. 
Non-returnable Items
• Items that are cut, damaged or abused;
• Items that are missing accessories such as remote controls, cords;
• Personalized or customized items;
• Clearance items are sold as is. No returns, refunds, or exchanges will be accepted for any clearance item. Clearance items are warrantee for replacement only.
Return products methods
• Pack your return in the original shipping package, if possible.
• Include the packing slip and indicate the reason for the return.
• Include all original packing materials, manuals and accessories.
• Send your return to our address below:
Beacon LED Lighting Pte. Ltd.
No 8, Boon Lay Way,
TradeHub 21, #11-14,
Singapore 609964
Shipping Charge Refund and Restock Policy
Lights ordered may be returned in its original condition without any damage or stains within 30 days from the initial ship dat if the customer is not completely satisfied for any reason, we will refund the entire purchse price of the products less shipping and handling. For returned lights due to quality problem, please enquired at our customer service first and we bear the shipping and handling cost. For the return is not due to quality problm, return shipping costs are the buyer's responsibility. In addition, if your purchase was eligible for Free Shipping, there will be a 10% restocking fee deducted from your credit or refund. The product warranty period is shown for each product in the product detail page. This date is from the purchase date, please email or call us and we will repair or replace the products. 
Refund Method
Once a returned product has been verified, we will refund money to the original credit card or bank account. The bank handling charges if occurred will be deducted.
Payment
• We accept payment via Qoo10,Credit Card, Cash and Cheque(to DBS).
• Payment must be made within 7 days of order closing.
• TOTAL AMOUNT includes the final price plus S&H(Shipping and Handling fee).
• Please note your special requests (color, packages, value of declaration, etc.) in the order or send us Qoo10 message when you make payment.
Dear Buyer Notice
• You can get your money back within 30 days from the initial ship date without reason. The return should be in its original condition without any damage or stains.
• If the lights cannot completely satisfy you, please torture us till your full satisfaction.
• We would be very delighted to obtain the highest satisfaction rating from you if you are pleased with our products and services. Your positive feedback would encourage us to serve you better.
• If you have any questions, please send Gmarket message to our service specialists. If no response within 24 hours, please send email again, because maybe the system missed your email.
• Please check our return policy carefully before purchase.

Our customer reviews

Frequently Asked Questions
Q: What is luminous flux (lm)?
Luminous flux or luminous power is the measurement for the perceived brightness of light, simply means light output. The unit of luminous flux is the lumen (lm). One lumen is defined as the luminous flux of light produced by a light source that emits one candela of luminous intensity over a solid angle of one steradian. No matter what lamps you use, they have the same brightness if they have the same luminous flux.

 

Q: What is light intensity (cd)?
Light source in a direction of luminous flux within the solid angle size. In general, the light source to the different intensity in different directions in order to shine their luminous flux. In a specific direction of the visible light, emit radiation known as light intensity.
Q: What is brightness (cd/m2)?
Brightness is the perception elicited by the luminance of a visual target. This is a subjective attribute/property of an object being observed.
Q: What is luminous efficacy (lm/W)?
Luminous efficacy or lighting effect is a measure of how well a light source produces visible light. It is the ratio of luminous flux to power or wattage. Here are some examples of luminous efficacy of different light sources:
Light Source Luminous efficacy (lm/W)                  
incandescent 15                  
fluorescent 70                  
CFL 50-80                  
LED light 70-90                  
Q: What is illuminance (lm/m2)?
Illuminance is a measure of how much luminous flux is spread over a given area. One can think of luminous flux as a measure of the total “amount” of visible light present, and the illuminance as a measure of the intensity of illumination on a surface. Its unit is lux. One lux is equal to one lumen per square metre. Here are some examples of the illuminance provided under various conditions:
Lux Surfaces illuminated by:                
50 Family living room lights                
80 Office building hallway/toilet lighting                
100 Very dark overcast day                
320-500 Office lighting                
400 Sunrise or sunset on a clear day                
1000 Overcast day                
10000 Full daylight (not direct sun)                
Q: What is color temperature (K)?
The color temperature of a light source is the temperature of an ideal black body radiator that radiates light of comparable hue to that of the light source. Its unit is expressed in kelvins; a higher kelvin number means the light is cooler/more blue, and a lower number means that it’s warmer/more yellow. For example, color temperature over 5300K are called cool white color or daylight color or sunlight, which is near natural light, brings you a bright feeling, and makes you vigorous. Widely used in office, meeting room, class room, drawing room, design room, laboratory, reading room and so on. The color temperature (3300-5300K) named neutral color, the color take you a happy, comfortable, serene feeling, widely applied in shop, hospital, office, restaurant, waiting room etc. Lower color temperatures (2700-3300K) are called warm white color, which is near that of incandescent light, more red, can bring people warm, healthy, comfortable, suitably applied in family, housing, dormitory, hotel and low-temperature occasion.
Q: What is color rendering (Ra)?
In principle, artificial light and natural light should be the same, using the naked eye can correctly identify the color of things. Of course, depending on the location and purpose of lighting may be. Color rendering light source for the extent of an object as color rendering, often called the “color rendering index”
Q: What is beam angle (half-value)?
Beam angle is the angle between direction of light intensity to reach half of normal intensity and normal direction.
Q: Do LEDs have to warm up like other energy efficient lights?
All LEDs are “instant-on” and “instant-off.” Anyone who has used halogen lights, fluorescent lights, or the smaller CFLs (compact fluorescent lights) will be familiar with the flickering, slow powering up of these other energy efficient lights. It is a common frustration. LEDs do not have this “warming up” problem, and reach full power and luminosity in a matter of milliseconds. They also turn off without the flickering and warming down that is common with other types of non-incandescent lighting.
Q: Are LEDs as bright as other lights?
Comparing the brightness of LED lights such as our LED bulbs and incandescent bulbs is difficult because they consume such different amounts of electricity. An “efficient” warm white, 60W incandescent light bulb produces around 800 lumens. A comparable 60W-equivalent LED bulb that consumes 7 watts of electricity produces roughly 700 lumens. So although it produces about 12 percent less light, the LED alternative produces 6.7 times as many lumens per watt. So for a given amount of electricity consumed, LED lamps are far brighter than traditional lamps.
Q: How do LEDs compare to CFL bulbs?
LED lights and compact fluorescent lights (CFLs) are the two most popular energy-efficient lighting options. However, the similarities end there. LED lamps are easy to install, are durable and long lasting, generate little heat, and contain no hazardous substances of any kind. CFLs, on the other hand, may require specialty fixtures, are easy to break, have a lifespan about one-fifth that of LEDs, produce a decent amount of heat, and contain dangerous mercury gas that is released when they are broken. They are also less convenient and comfortable to use because they often take a while to “warm up” and reach full brightness and often flicker and hum. Additionally, every cycle of turning a CFL on and off decreases the bulb’s lifespan. These differences mean that for a slightly higher price, LEDs provide better safety, increased savings, greater comfort, and better environmental friendliness.
Some LED lights and CFLs available at major hardware retailers have comparable energy efficiency, while in most cases LEDs are noticeably more energy-efficient. Of course, the other advantage of LED lights is that because most of them use fewer watts than CFLs.
Q: Why are LEDs so energy efficient?
The main reason that LEDs use so much less electricity than traditional lighting is that they don’t produce light in the same way. Incandescent lights pass electricity through a filament that must get extremely hot for its atoms’ electrons to become excited enough to give off light. Most incandescent bulbs waste about 90% of the electricity they consume as heat because of this, making them incredibly inefficient light producers. LEDs, such as the popular LED recessed fixtures that easily replace incandescent fixtures, produce light using electroluminescence. This process doesn’t use a filament and creates little heat, instead relying on a property of semiconductors to generate light. It is thus far more efficient at converting electricity into light.
That efficiency is what enables LEDs to produce the same amount of light as the bulbs that LED recessed fixtures would be replacing, while consuming so little power. Of course, the fact that LEDs don’t waste energy by creating or relying on excess heat is also part of what makes them so safe, as well as why they don’t need the large, fragile glass bulbs full of toxic gasses that make handling other lighting sources more difficult. 
Q: Do LED lights screw into standard household light sockets?
Yes, LED lights are direct screw in replacements for household lights. You unscrew your incandescent light bulb and screw in your LED Light bulb. You do not need to redo your electrical system to use the LED lights. 
Q: Where do we ship to?
We ship anywhere all over the world.
Q: Do LED lights generate heat?
Yes, comparing with energy saving lamp, LED lights generate very little heat. They are ideal for kitchens, dens, offices, or anywhere you are working in close proximity to a standard light bulb. That is why LED Lights are so energy efficient.
Q: Can I use them to replace incandescent bulbs in an enclosed ceiling light fixture ? 
Yes, the LED light bulb is a direct replacement for incandescent bulbs, energy saving lamp, and CFLs.