First of all, confirm the normal operation of all 10

* If there is a problem in a short period, we change the evaluation point, we will review it We purchase to replace the T 6.5 ball used in the motorcycle meter etc etc. When I tried it all got lit without problems. Although there is polarity, there is a difference in "thickness of terminal wire", so you can distinguish by looking. The brightness is darker than the ordinary T 6.5 sphere (although it is only a reversal if it is not inserted first). But I think that it is sufficient light intensity because it only lights up the blinking or blinking lamp of neutral display or blinker display. Since there are many stories that break soon in other reviews, we will wait for durability.

Dangerous things are mixed

Only one piece did not turn on, but was internally short-circuited. It seems that the short was improved when pulling the metal of the foot, but it turned on, but there was a possibility that the part corresponding to the foot of the internal LED is in contact as shown in the comment of the other person. The other nine lighted normally, but if both poles are not insulated, it is scary when internal contact occurs. The worst situation may be avoided because it is thought that the fuse will fly if short-circuited, but I am afraid of the most important safety.

Plastic holder is weak against heat is a difficult point

Both terminals were soldered, but it seems that the plastic holder, which plays the role of insulation by the heat melted, shorted inside. Since we switched on already, we have transformed the adapter into a Buddha. Older brothers who are hard think that they will not do that, but just in case.

Copen

I used it for a meter ball. It is a good feeling. I wonder if this has to be long?

Anyway, no problem?

Used to replace the owned Suzuki made 400cc motorcycle meter lamp. Although only 3 are necessary, it was cheap, it was cheap, it was worried because there was also another review that there was a product that did not come from buying this product with becoming preliminary as well, but three were chosen randomly, There was. Probably I think that others are all right. In addition to the meter lamp I thought whether to change the neutral lamp etc, but when it was a genuine ball, it glows green but when it changed to this product, it got to shine blue and the discomfort was amazing and it returned to genuine. The meter is bright white and clearly visible so it is worth changing. The problem is that I am at a loss as to what to use for the remaining 7 pieces.

It is common sense, but the LED has polarity.

Although there seemed to be someone who did not turn on, five did not light up, three lights did not light up, or someone with a low rating appeared, "There is so much initial failure in industrial products, I thought "There is also a cheap one, bought vigorously. As soon as it arrives, it is tested with a 12 V AC / DC adapter from a household power supply test. All lights turned on. There is no problem in light intensity and color, it is satisfactory. ... I think common sense, but the LED has polarity. If + and - are reversed, it will not light. If it does not light up, rotate it 180 degrees and try again in the opposite direction.