Item Descriptions:

color:

gold

Set contents:

Kanikan (S size): 10 × 6 mm

Kanikan (M size): 12 x 7 mm

Alligator port: 8 × 8 × 5 mm

Hook earrings: 19 mm

Ball chip: 8 x 4 mm

Washer: 6 x 1 mm

String stop: 6 x 3 mm

Drop: 6 x 3 mm

Marukan (S size): 4 mm

Marukan (M size): 6 mm

9 pin: 22 x 0.7 mm

T pin: 22 x 0.7 mm

Azuki chain: 50 x 3.5 mm

Ball chain: 1 x 1000 mm

Twist chain: 3 m long, link: 2.5 x 1 mm

color:

Antique, gold, silver

Material:

alloy

"Notes"

Depending on your PC monitor, the color of the image may look different from the real one.

Depending on the arrival time etc. of the same item, there may be individual differences in specifications such as size, color, shape

Products with damage such as small scratches may enter

Since the size below is measured by hand, actual size may differ slightly from the above size Please be forewarned.

Moreover, although we are packing so that it becomes more than the number, some errors may occur with weight weighing.

Characteristic:

A wonderful material for children's arts and crafts, can be used as a creative kit.

Ideal accessories for any kind of craft project: making jewelry, scrapbooking, card making, decorating and other arts and craft works.

Easy to use, besides making accessories, it is a tool kit that is easy to use for detailed work such as bead crafts and plastic making.

It is well preserved with plastic box set.

【Basic knowledge of handmade】

Use of alligator mouth:

Cut your favorite ribbon you prepared.

Position the edges, pinch them in the straps, and close tightly with a flat tie.

【POINT!】

Let's compare the good example and the bad example of how to close the strap closure in the photograph here.

Use of ball tip:

Pass the tegus through the hole of the ball tip and tie the tegus securely.

Tie a few times so that the knot will not come out of the hole in the ball tip.

Cut off extra tegus, attach a small amount of adhesive to the knot, and close the ball tip with the flat yatto sandwiched between both ends.

Use of T pin:

First, pass the bead through the T pin.

At the very end of the beads, bend the pin at right angle (over 90 degrees).

【POINT!】

It is good to make a margin from the root just a little and bend it, or bend lightly with only Nemoto in flat Jatco and use your hands at right angles.

Cut the unnecessary pins with the nipper, leaving the length (about 7 - 8 mm) for bending the pins to make the loop.

Roll the pin so that the wrist is returned to the left (the direction of the bead) and make a loop.

In case

Use of Malkan & Kanikan:

Hold flat yacht on both hands.

Grab the perimeter of the left side of the round can at the tip of the left hand yatto, open it to shift it up and down in the same way with the right hand.

【POINT!】

When opening to the left and right, the shape of the round can collapses and it becomes easy to break with metal fatigue, so be sure to open it up and down

When connecting earring metal fittings and charms with round cans,

Through your favorite charm through the open round can, close so as to return the open round can.

Let's close firmly so that no gaps are formed.

Features:

• ⑥ Canopy: 6 x 3 mm; ⑦ Drop: 6 x 3 mm; ⑧ Marukan: 4 & 6 mm; ⑧ Mandarin orange: 4 x 6 mm;
• ⑨ Pin: 22 x 0.7 mm; ⑩ Azuki chain: 50 x 3.5 mm; ⑪ Ball chain: 1 x 1000 mm; ⑫ Twist chain: 3 m long, link: 2.5 x 1 mm.
• It is a basic metal fitting essential to accessory parts of handicraft materials.
• Basic item of accessory parts!
• Please use it for parts of handmade work !!
• It is a popular handicraft article.
• How to make, how to use!
• Handmade necklaces, bracelets, accessories etc, you can make handmade works of yourself with a wonderful handmade.
• Panda Hall Elite has handmade handicraft items such as other beads, charms, various parts, so let's choose your favorite items ♪

Product information:

Shipping Weight: 158 g

Package Dimensions: 3.40 x 14.71 x 20.29 cm