Work with T-Mobile 1700/2100MHz Band 4 in the frequency range:Uplink:1710-1755MHz;Downlink:2110-2155MHz
improves the voice quality and faster 4G Lte in your home,office,villa,garage,basement and so on
It is better to determine the exact in different location until the highest signal strength is received on your phone(most amount of bars). Once you ascertain the best location then permanently mount the outdoor antenna.Keep the distance between the outdoor antenna and indoor antenna should be above 22ft and make sure a proper amount of physical separation between outdoor antenna and indoor antenna.These things are absolutely critical for this booster to work
The installation requires no technical experience,it is very easy to install
FCC Certificate

Technical Details

Product Details

Package Dimensions
Width : 8.2 inch
Height : 3.65 inch
Length : 17.05 inch

Shipping Weight: 2.35 pounds (View shipping rates and policies)

ASIN : B01M65331X

Product Description

NOTE:
1.This product could only make the weak signal stronger,it couldn''t create signal,so the outdoor yagi antenna should receive 2-3 bars of stable signal in the location where the outdoor antenna is mounted, or the booster couldn''t work very well

Operation Frequency:Band 4
Uplink:1710MHz-1755MHz,Downlink:2110MHz-2155MHz
Emission Designator:LTE(G7D)
AGC LEVEL:Uplink:-45.00 Downlink:-56.00
Max.Antenna Gain:Uplink:8.3dBi Downlink:8.0dBi
FCC Classification:B2W/Wideband Consumer Booster(CMRS)

Package Includes:
1* Signal Repeater
1 * Indoor wip Antenna
1 * Outdoor Directional Yagi Antenna with 32ft coaxial cable
1* Screws for Mounting
1* English User Manual

Installation Guide:
1.Check and find a place where your cell phone can receive the best signal outside your house,then mount the Outdoor Yagi Antenna and keep the outdoor antenna towards the cell signal tower
2.Mount the signal booster device somewhere inside the house,the signal booster should be mounted where is near from the power socket, and have good ventilation.
3.Tightly connect Outdoor Yagi Antenna to the OUTDOOR port of the repeater
4.Tightly connect the Indoor Whip Antenna to the INDOOR port of the repeater.