Digital Displaying Satellite Finder TV Signal Finder  Sat Decoder Satlink receptor (Blue) Satellite Signalmeter finderwith campass Buzzer FTA Dish Network DIRECTV
<br />Color: BLUE
<br />Digital Satellite Finder
<br />POWER:13-18V DC
<br />Frequency range:0.95GHz~2.15GHz
<br />Input Level Range:-40dBm~~-10dBm
<br />Operating Range(LNB gain):52-60dB
<br />Impedance:75 
<br />Weight:175g
<br />In-Line IF signal strength meter 
<br />75  connector
<br />Built-In light & electric buzzer
<br />BUILT IN COMPASS
<br />Uses power from receiver to power up
<br />Ideal for satellite installations or to re-point your satellite dish
<br />Pocket-size
<br />User-friendly
<br />What's Included In The Package:
<br />1 x Digital Satellite Finder
<br />1 x User Guide
<br />Instructions:
<br />SATELLITE FINDER OPERATION:
<br />1:Switch the satellite receiver on, the digital SATFINDER will turn on by itself.
<br />2:Set your dish to the proper azimuth and elevation settings. (The information should be supplied with your satellite dish).
<br />3:Adjust the knob until the signal strength display at 0% (the critical point).
<br />4:Peak the signal by slowly moving the azimuth and elevation of your dish. The higher values, the better signal. If the digital SATFINDER s reading becomes full scale, you can adjust the   ATT  to reduce the incoming signal to a lower level. Continue to move the dish until you have the highest possible meter reading and the highest possible buzzer pitch.
<br />5:Remove the jumper cable and digital SATFINDER, and reconnect the LNB/ LNBF to your receiver.