Measurement of AC power monitor power meter multifunction energy
A. Function
1 electrical parameter measurement function (current， active power， power).
2 power button clear function.
3 with backlight function.
4 Power-down data storage function (cumulative power-down before saving).
5 large-screen LCD display (full-screen display current， active power， power).
Specifications
Operating voltage: 80 ~ 270VAC
Test voltage: 80 ~ 270VAC
2 Rated power:. 16A/3600W
3 Working frequency :45-65Hz
4 measurement accuracy: 1.0
Press Description
CLR
Electricity consumption above press 3S cleared.
LED
Short press to open the backlight turns off the backlight delay 30S (no key operation within the 30S).
C. functions and display
One. Backlight
After power backlight automatically lights go out after a delay 30S (no keystrokes within 30S)， the normal state short press "LED" button is lit backlighting， the same action in the absence of any key situations delay 30S off， if there keystrokes during an extended delay.
Two. Menu Display
Menu display with full parameter display status， no significant round buttons， as described above， the whole display intent.
Three. Parameter
1 Current
Measurement and displays the current load current measurement range of 0 ~ 16A， the data display format 0.00 to 16.00.
2 power
Measurement and displays the current total electricity consumption， measurement range 0 ~ 9999kWh， data display format 0 ~ 9999Wh， 10 ~ 9999kWh.
Note: Accumulated less than 10kWh of electricity when in Wh units to display and accumulated power over 9999Wh displayed in kWh and cumulative power
3 Power
Measurement and displays the current load power measurement range of 0 ~ 3600W， data display format 0.0 to 3600.0.
D. Notice
1 This module is suitable for indoors， not outdoors.
2 applied load can not exceed the rated power.
3 wiring sequence can not be wrong.
include:
1 PC
';