These custom made 22mm springbar are in 2mm body diameter and correct 1.2mm end tip. Double flange for easy removal and stronger than the generic 1.78mm type. Most important it will not damage lug holes on prolong usage too.
Price is for 2 pairs (4 pieces) of custom springbar !
Singapore Seller, Fast Shipment and Ready Stock !
These are custom 22mm springbar made to swap leather strap into Seiko Diver watches like the SKX, 6309, Turtle diver watch.......etc.
The Seiko’s Fat Springbar at 2.5mm diameter body is too thick for installing leather strap and other rubber/silicon strap ends. Being flangeless, they are also very difficult to remove too !
The thinner springbar in the market are either 1.78mm body diameter with unsuitable smaller end pins ; which is of no good and will elongate the lug holes with prolong usage for these Seiko diver watches.
These custom made 22mm springbar are in 2mm body diameter and correct 1.2mm end tip. Double flange for easy removal and stronger than the generic 1.78mm type. Most important it will not damage lug holes on prolong usage too.
They are suitable for use in Seiko Diver watches :
SKX, 6309 driver watch,
Monster Tuna SRP639,
Seiko SRP653 Scallop,
Seiko Stargate SRP493 (Ver1 and 2),
Seiko FrankenMonster SKZ255,
Dagaz Tsunami
Seiko Reissue Turtle SRP773, 775, 777, 779
...... any watches which has a pin head of 1.2mm
