Item Descriptions:

color:

blue

4 in 1: Cleaner & Lighting Light & Pump & Air Gauge.

In case

I firmly clean the pebbles, paper scraps, dusts, etc that remained in the car, and suck up the liquid.

In case

You can select the nozzle according to the valve on the side that enters the air, and you can put air into the car bowl etc.

With 4.5 m power cord and 3 types of attachment, large cars can be cleaned cleanly every corner, everywhere difficult to reach within the car.

The main body and all the accessories can be stored in the same storage bag compactly.

HOTOR has confidence in our products.

Therefore, 12 months warranty is attached.

How to use the cleaning

】:

1, Connect the cigar plug to the car cigar socket (DC 12 V) and switch it on.

2. Push the button on the handle in front to suck up the garbage.

3, In some cases, you can replace the nozzle of the accessory and use it.

It can be located anywhere on the car with a 4, 4.5 meter power cord.

5, It is more effective to use the nozzle surface and the cleaning surface parallel to each other.

How to use inflation

】:

1, Connect the rubber nozzle to the tire bubble and press the button.

I will prove that air will pass through when the sound of air comes out of the tire.

At that time, press the nozzle button so that air does not pass.

2. Connect the cigar plug and depart the car.

Switch on and start inflating.

3, When inflating, the pressure gauge's guidelines rise with tire saturation.

When the pointer reaches the proper air pressure, close the inflat switch (pressing the power switch backward will start inflating).

Remove the plug and nozzle and finish the inflation.

How to measure barometric pressure

】:

Connect the rubber nozzle to the tire bubble and press the button.

Connect the other side with the nozzle of the inflation pump.

The pressure gauge measures the pressure by itself.

There is no need to turn on the power switch of the car and inflation pump.

How to light

In case

Connect to the car cigar socket and turn on the light switch on the handle, the LED light will light up.

specification

】:

Product name: HOROR 4 IN 1 Car Cleaner

Input power: 10 A - 15 A

Model number: ZY-6601-A

Input voltage: DC - 12V

Size: W408 × D108 × H145 (mm)

Power consumption: 100 W

Weight: 1.5 KG

Cord length: 4.5M

Nozzle attachment: 150 mm

Valve tube: 600 mm

Features:

• 【Attention】: ① Please clean well after cleaning after each cleaning so that it can be used for a long time.
• ② In addition, please use a brush to clean dust and dust between the floor mat and the seat mat.
• 【Super powerful suction power】: DC 12V 106W 3000PA Suction force, you can easily inhale the iPhone 6s.
• It is satisfactory because it sucks up enough dust and fine garbage.
• Fluid can also be sucked in.
• 【Multi-function】: dry and humidity handy cleaner, 3 types of attachment included: You can clean the place where it is hard to reach such as the gap of the seat cleanly.
• 【Tegal, with storage back】: It's easy to carry around.
• All accessories such as body and nozzle can be stored in the same storage bag compactly.
• I do not take places when storing in the car.
• [Set contents]: Main body, power brush, extension hose, gap nozzle, nozzle attachment, 5M power cord, instruction manual, storage bag.

Product information:

Shipping Weight: 1601 g

Package Dimensions: 12.29 x 17.80 x 41.71 cm