Product parameters:
Supports standard: IEEE802.11 B / G / N
2500 MHz frequency: 2400 -2500MHz
Impedance: 50ohm
RF output power: 2500MW [34dBm]
Transmission gain: 13-17 dB
Receiver Gain: 8 - 12dB of
Noise factor: 3.0 dB (typ)
Operating temperature: -40 ° C to + 70 ° C
Humidity: up to 95 °
Housing: Aluminum
Weight: 400g
Size: 6.5X3.0 × 1.5 cm
usage:
1. First dismantle antenna wireless AP or wireless router.
2. took SMA cable (RG316), connection wireless AP (wireless router or wireless card) and a signal amplifier TO Radio port.
3. At the other end of the signal amplifier (TO Antenna) antenna connected.
4. Plug in the power, is complete.
note:
PA is not suitable for use in high-power devices.








