Item Descriptions:

size:

2 in 1

Orinsong A new 2 in 1 special car set holder appeared!

!

Every car can correspond with a special 2 in 1 set.

In case

There are two kinds of usage.

Remove the dirt on the installation surface and press the entire suction cup so as to push out the air.

While holding down the holder, lower the vacuum lever.

I confirm that it is firmly nationalized.

Since an adapter attached to the air outlet of the air conditioner is attached, remove the suction cup mount stand and insert it into the air conditioning outlet and use it.

compatibility

iPhone 4/5/5/5 S / SE / 6/6 Plus / 7/7 Plus / 8 / plus / X

Samsung Galaxy S3 / S4 / S5 / S6 Edge / S7 / S7 Edge

Samsung Galaxy Note 1/2/3/4/5

HTC One, HTC DNA, HTC EVO

Xperia Z 4 / Z 5 / X Z / X A 1

Nokia Lumia 920/1020 and GPS car navigation system

LG, Huawei, Sony etc.

For basic fixing, we used slide arms familiar to the car, iPhone as well as large size Galaxy Egde corresponded widely.

Orinsong vehicle holder can freely adjust the angle you like.

★ Can be installed vertically or horizontally

Since it adopts a 360 ° rotating ball joint, it can rotate freely.

It is possible to use it in portrait and landscape.

It is also possible to hold a smartphone at the optimum angle corresponding to installation of a complex angle.

★ 50 mm telescopic arm

This product is equipped with telescopic arm to give excellent viewing angle.

It is possible to move 50 mm before the installation position.

You can also fix it to a dashboard with depth.

Orinsong Automotive Holder Main Features:

Extraordinary suction power

Since the suction cup of this holder is an adhesive type, it can be fixed not only to the front windshield but also to the dashboard.

In addition, the lock lever can control the suction force in three stages.

Adsorption power restored by washing with water:

When the adhesion of the sucker weakens, the adhesion is restored by rinsing it.

Adhered dirt can also flow with water.

Cable connection available:

Since the lower connector is not hidden, cables can be connected while being attached to the holder.

Smartphone and mounting method:

★ When using, please open the foot under the base first.

When you press the release button on the back of the pedestal a little, the fixed arms on both sides will automatically open and you can manually push the fixed arms on both sides and get caught in Susumaho.

★ There may be cases where the suction cups do not adhere firmly to the rough dashboard of the grain processing.

Packing contents:

1 x smartphone holder

1 x Arm Stand

1 x Mount

1 x Air Conditioner Adapter

Features:

• 【2 in 1 car holder】 Since it is a gel sucker type holder + air conditioning outlet set, it can be attached to windshield, dashboard, air conditioner blowing out etc etc.
• It will not come off even with vibrations or uneven roads in the engine.
• 【Outstanding stability】 Adsorption power Outstanding gel suction cup Plus lever makes vacuum state, so it can be fixed firmly to the dashboard and windshield.
• Also, through adjustment of the spring clip, it can easily be attached to the air outlet of the air conditioner.
• [Telescopic rotation free] The spherical design of the joint part allows the holder part to rotate 360 ​​degrees.
• Arm part can stretch up to 50 mm, rotate up and down 180 degrees.
• You can adjust the smartphone to the optimum viewing angle.
• In addition, there is no magnetic influence, the signal does not get in the way even while talking
• 【Wide range of compatible models】 Holder part opens widely to the left and right, it can correspond to smartphone and case etc. with a width of 55 ~ 100 mm.
• Large smart phones such as iPhoneX can also correspond.
• 【Simple detachment with one touch】 Pressing the release button on the back of the holder allows the arm to open automatically and hold the smartphone securely.
• When using, you can fix the smartphone in the optimum position by just adjusting the orientation and angle of the holder.
• It does not scratch the smartphone by using flexible sponge rubber cushion and rubber clip arm.

Product information:

Shipping Weight: 231 g

Package Dimensions: 9.19 x 12.39 x 12.80 cm