DC 12V 2 Channel Wireless RF Remote Control Switch Transmitter + Receiver
Features:
This Remote Control Switch is designed for the alarm of motorcycle， bicycle， supermarket， door， etc.1. Operating Voltage: 12V2. Control Channel: 2 Channels3. Work: jog or self-lock4. Supporting remote control: 50 ~ 100m (Open Place) two-button remote control5. Receiver parameters:
1) Operating voltage: DC12V2) Working frequency: 315MHZ3) Contact capacity: !#!amp!*!le; 10A\/250VAC; 10A\/30VDC4) Receiver sensitivity:!#!amp!*!gt;-105dB5) Remote control distance: 50 ~ 100m (open area) (please stretch the antenna in order to achieve effective distance)6) Control approach: four normally open (normally closed) contacts7) Encoding type: fixed code; pad code
6. Remote control parameters:1) Operating voltage: DC12V (battery included)2) Operating Current: !#!amp!*!le; 10mA3) Operating frequency: 315MHz4) Transmission Distance: 50 ~ 100m (open area) (please stretch the antenna in order to achieve effective distance)5) Encoding type: fixed code; pad code
7. Package size: 120 x 70 x 30mm
Instructions:
Jog: press one button is ON. Loosen your finger on the same button is OFFSelf -lock: press one button for one time is ON .press the same button again is OFFInter-lock: press one button is ON， press another button is OFF. (Need one channel switch and 2 buttons remote control)
Learning and remove method:
1. Press the first learning code， the indicator flash， loosen your finger， press first button of the remote control ，the indicator flash 2 times and off; press the second learning code， the indicator flash， loosen your finger ， press second button of the remote control ，the indicator flash 2 times and offit mean you learn it successfully.2. Remove\/clean: press the learning button about 8 seconds， the indicator turn on to off， it means the information that you keep have been removed successfully .
Package included:
1 x Receiver Board1 x Remote Controller (battery included)