【名称】蛋糕盏烘焙模具 大号马背模
【规格】长约21.5cm ? 宽约11.8cm ? 深度约4.7cm ?(手工测量可能存在误差)
【产品类型】烘焙模具
【材质】铝合金
【处理】阳极处理
【包装】散装
【重量】95克
?
产品特点:1、产品外观简洁大气,采用一体成型技术,光滑易清洗 ? 2、产品表面采用一体成型技术,抛光处理,光滑靓丽,清洗方便,更容易脱模 ? ? ?3、产品边缘采用包边处理一体成型技术,不伤手,清洗方便? ? ?4、采用高强度铝合金板强度高、刚性大、导热性能好强桥耐用 ? ? 5、高强度铝合金材质,清洗方便 ? ? ?6、低摩擦系数,加强表面光滑,更容易脱模 ? ? ??7、耐高温,在高温情况下保持良好的机械性能
使用说明:1、首次使用,需先将内部洗净,再用软布擦拭干净 ? ? ?2、每次烘烤完成后,请用软抹布或软质塑料刮板,将残留在器具中的残余物清除 ? ? ??3、每使用一段时间,最好以温水+少量中性洗洁精,用软抹布把器具内的残留物彻底清洗掉
注意事项:1、请勿使用尖锐金属品、百洁布或化学试剂擦拭 ? ? ?2、请勿将烘烤过或未烘烤的产品留在器具内,因积累在产品中的湿气、糖分和淀粉所形成的腐蚀物会腐蚀器具 ? ? ?3、储存时,要轻拿轻放,保持器具干燥,不可储存甚至堆积在潮湿的地方
【Name】 cake light baking mold large horse back mold
【Specifications】 about 21.5cm wide and about 11.8cm depth of about 4.7cm (manual measurement error may exist)
【Product Type】 baking mold
【Material】 aluminum alloy
【Treatment】 anode treatment
【Packing】 bulk
【Weight】 95 grams
?
Features: 1, the product appearance of simple atmosphere, the use of one molding technology, smooth and easy to clean 2, the product surface using one molding technology, polishing, smooth beautiful, easy to clean, easier to mold release 3, the edge of the product processing package forming High strength aluminum alloy plate with high strength, high rigidity, good thermal conductivity 5, high strength aluminum alloy material, easy to clean 6, low friction coefficient, to strengthen the surface smooth, easier to take off. Die 7, high temperature, high temperature conditions to maintain good mechanical properties
Instructions for use: 1, the first use, the need to first wash the internal, and then wipe clean with a soft cloth 2, each baking is completed, please use a soft cloth or soft plastic scraper, the residues in the device to remove 3, each use for some time, it is best to warm water + a small amount of neutral detergent, with a soft cloth to the utensils of the residue thoroughly washed out
Note: 1, do not use sharp metal, scouring pad or chemical agent wipe 2, do not baked or unbaked products remain in the apparatus, due to accumulation in the product of moisture, sugar and starch The formation of corrosion will corrode the apparatus 3, when stored, to gently, keep the apparatus dry, can not be stored or accumulated in a damp place




