
Wirelessly transmit high-definition video from your PC to your TV with the Wireless 1080p Computer to HD Display Kit from IOGEAR. This device supports wireless transmission of video and still images up to 1920 x 1080, and has a transmission range of approximately 30'. Onboard Ultra-Wide Band (UWB) wireless USB technology is designed to deliver stable connections with reduced interference. The receiver offers HDMI and VGA outputs for connecting to your display, while the wireless transmitter interfaces with your computer via USB. Additionally, the receiver is expandable and can communicate with up to 8 USB transmitters. A CD-ROM is included for installation of software and drivers.
| Audio Output | 2 Channel 16-bit DAC |
| Sample Rate | 48 KHz, 16-bit either from 3.5 mm stereo jack or HDMI connector |
| Dynamic Range | 90 dB |
| Video Streaming | Up to 1080p resolution |
| Video Resolution | Up to 2048 x 1152 (SXGA+) |
| Ports |
1x HDMI Output 1x VGA Output 1x 3.5mm Stereo Jack 1x USB type-A male |
| Antenna Type |
USB Transmitter: Internal omnidirectional A/V Receiver Base: Whip omnidirectional |
| Transmission Range | Up to 30' / 9.1 m (same room, clear line of sight) |
| LEDs |
ACT (Activity): Blue Power On: Red |
| Temperature |
Operating:32 to 104°F / 0 to 40°C Storage: -4 to 149°F / -20 to 65°C |
| Frequency | 6.336 GHz to 8.448 GHz |
| Requirements |
PC: Intel 2.2 GHz processor (2.4 GHz Recommended) with 2 GB (3 GB Recommended) of system memory (RAM) Windows 7, 8, 8.1 Graphics Chipsets Supported: Intel, AMD, and nVIDIA An available USB 2.0 Port or USB 3.0 Port TV: HDTV or Projector with HDMI, VGA (RGB / D-sub 15-pin / PC), or DVI port (DVI adapter not included) TV or audio system with HDMI or 3.5mm audio jack |
| Dimensions (HxDxL) | 1.0 x 3.4 x 5.7" / 2.5 x 8.6 x 14.5 cm |
| Weight | 0.35 lb / 159 g |