Item Descriptions:

Automotive maintenance tool · Multifunctional dent restoration set

The sheet metal tool consists of a part called a bridge type tool and an adhesive tool, and the surface concave of the truck which became daily depressed state and home appliances such as a washing machine

We will also respond to your return.

Operation It is easy to use Japanese character instructions, so you can use it with a beginner.

On top of that, the material of the product itself is environmental protection

Based on that, it is excellent in merit that it is non-polluting and lightweight and convenient.

Since the bonding tool is a high temperature molten glue gun, it takes only 3-5 minutes to stick

It becomes the required warmed state, and just reworking of car can revert to original state just by painting.

Therefore, a collision of cars on the streets by chance

So, it does not bother to come to the repair shop, it is a convenient tool that can be self-repaired.

【Package Contents】

Silver bridge type 1 point

1 glue gun, 10 glue stick adhesives

Tab 5 points (except with bridge type tool), hot melt glue removal brush 1 point

Bridge type tool body

The main bridge type tool that brings the concavity of the car body back to its original state is a tab 1 with a bridge type main body

We have 6 kinds of tabs different in size from each other, including sheets.

After the sign to the recess of the car,

Tab for size can be selected.

【Tab Specification】

Dimension: 20 cm x 14.8 cm x 6.9 cm

Bridge type tool: 18.3 cm x 3.5 cm x 7.0 cm

Diameter of suction cup: 4.8 cm, thickness: 6 mm

Total 6 types Size (including with bridge type tool)

Round shape diameter 3.5 cm: 7.0 cm (length) x 4 mm (thickness) x 3.5 cm (height)

Round diameter 2.9 cm: 7.0 cm (length) x 4 mm (thickness) x 2.9 cm (height)

Round diameter 2.6 cm: 7.0 cm (length) x 4 mm (thickness) x 2.6 cm (height)

Round shape Diameter 2.3 cm: 7.0 cm (length) x 4 mm (thickness) x 2.3 cm (height)

Oval shape 1: Width 3.2 cm, width 2 cm

Oval 2: Width of 2.1 cm, Vertical width of 1.3 cm

Notes on using glue gun

In case

1, post treatment of bars with bonds:

If sticks inserted in glue guns can not be used up, they can not escape from the glue gun, they are cooled by the support of a safety support holder under the nozzle, and the next use is also possible while being inserted.

2, The reason why the glue leaked out is as follows:

A, pressure by the glue gun body:

In case

The glue stick is not in a state where the stick is kept melting unless the glue gun is energized, so if it is not to completely use the stick while propelling the dolly device, the glue leak is glue leakage due to the pressure of the glue gun drill device

There are times when it occurs.

B, melting of the stick after the power supply is turned off Continued:

In case

As glue gun gets energized, the temperature of the main body also becomes high, so even if the power supply is temporarily cut off, the temperature will not come down soon, so when the stick is not in use it is melted at the remaining temperature of the glue gun

, There is a risk of glue leakage.

So, is not it a good timing to turn off the glue gun from 3-5 minutes before it is not used?

Then, there is no leakage of Sugurou, there is no waste of Tick.

Explanation of each part and usage

Since the suction cup of the tab has a hole to empty, pressure is given to the gap of the indentation, and the original state

You can easily return it.

In the recessed part of the car

In order to fit, a thick sucker glue and

It works together, and it can stick firmly.

Bridge type tool with nut control

So you can exchange tabs freely

Then, black sucker with right and left sucks the compressive force of air

Increase and increase tensile force.

Reconstruction of your car's dent is completed in 6 steps

to come.

Easy to operate, even those without experience

You can use.

The flow of operation is as follows

It is.

Step 1: Please wipe the recessed part of the car with a wet towel cleanly.

Step 2: Energize the glue gun and preheat for about 3-5 minutes.

Step 3: Apply warm glue to the entire tab evenly.

Step 4: Paste the tab as fast as possible into the recess.

Step 5: Please turn until the nut of the screw is tightly attached to the dent

Step 6: Remove the glue that remained in the car with a scoop.

Features:

• [Contents of 18 points] Dent repair tool used for car dent repair is set as a set, silver bridge type 1 point, 1 glue gun and 10 glue stick adhesives and 5 tabs, hot melt glue removal brush etc
• If you have 18 points, small depressions, you can operate easily without having to deliberately go to the car repair shop.
• [Advantage] In exchange for ordinary paint car repair, the work method of repairing unpainted car dents was adopted, so it is easy to restore the original quality of your car perfectly, it can be easily cleaned at home, putty and
• It is an environment-friendly dent reworking work without repainting.
• 【Tab with Hole, Tensile Strength】 In order to make the dented portion of the car return to its original state with a bridge-type hand-held tool, the tabs of 6 types of sizes are aligned and it is possible to respond to the size of the car indentation
• , With a small hole on the contact surface, since it becomes strong tensile force by the action of compression force when using, it will return the dent immediately.
• 【Scope of application】 Sheet metal tools are not limited to car dent repair but can be used for repairing household electric appliances such as dent in the refrigerator of your home or repair of dent in washing machine, repair of motor bike for traffic, etc.
• So we will respond to various cases.
• 【Speed ​​of repair and shortening of time】 Combined with glue gun which works as an adhesive tool, even if it suffers a breakdown on the street, it can be quickly repaired with super strong stickiness of glue stick which can melt for 3 to 5 minutes,
• It is a maintenance tool required for automobile body repair tool.

Product information:

Shipping Weight: 480 g

Package Dimensions: 6.10 x 20.19 x 22.81 cm