Looking for fast and powerful motor for combat robot? You are at the right place. The AmpFlow motors are designed to give the highest level of performance possible in a brushed DC motor. This is achieved by advanced design and the use of less expensive ferrite magnets.

The economy E30 motors are designed to give good performance at the lowest possible price.

These motors are used in diverse applications including robots, industrial motion control, factory automation, semiconductor manufacturing, motorized scooters, go karts, and electric bicycles.

If you need higher torque motor or lower speed motor, check out the motor with speed reducer.

Specifications:

Motor Diameter: 3.1 inch or 7.874 cm
Length: 5.8 inch or 14.73 cm
peak Horsepower: 2.1
Peak Torque: 1500 oz-in or 10.6 Nm
Efficiency: 79%
RPM at 24V (no load): 5700
Shaft Diameter: 1/2 inch or 1.27 cm
Shaft Length: 2 inch or 5.08 cm
Keyway: 1/8 inch or 0.3175 cm
Capacitors: No
Magnet Type: Ferrite
No Load Amps: 3.1 Amps
Stall Current: 266 Amps
Terminal Resistance: 0.089 ohm
Kt: 5.63 oz-in/Amp
Kv: 240 rpm/Volt
Rotor Inertia: 0.05 oz-in-sec^2
Thermal Resistance: 4 degC/Watt
Weight: 2.68kg
Compatible driver: MDS160