Product Description
By replacing your normal wall switch with the TOPGREENER TSOS5-W Passive Infrared Wall Switch Occupancy Sensor, you can enjoy great savings and convenience with lighting control. When you put the slide switch button to AUTO mode, TSOS5 PIR motion-activated sensor will detect motion and turn on load such as a light, fan, motor, and heater automatically; and turn off the load when no motion is sensed for pre-set delay time. You can set delay time between 15 seconds, 10 minutes, 20 minutes and 30 minutes. Passive Infrared(PIR) sensors detect occupancy by sensing the difference between heat emitted from the human body in motion and the background space. In order to provide adequate coverage with-in a space, the sensors utilize a unique Fresnel lens which divides the coverage area into zones, thus enhancing the detection of small movement. The maximum coverage area is up to 980 sq. ft, 150 degree field of view; sensitivity level is adjustable in 4 positions from 30% to 100%. TSOS5 wall light control motion sensor switch allows you to set the ambient light level in 4 positions. When setting ambient light level to position 4, you will enjoy the Daylight energy efficiency benefit and avoid energy waste by preventing turning on light automatically at Daylight even when motion is detected. It is ideal to install TOPGREENER TSOS5 in-wall sensor switch to areas like your hallway, stairway, closet, bathroom and garage. You can use TSOS5 as occupancy sensor, and also you can set it to be OFF mode or ON mode just like you switch off / switch on lights and other normal electronic switches. This operation can be done easily by sliding the switch slider on the front of product. Incandescent: 500-Watt at 120-Volt AC - Fluorescent: 500-Volt Amp at 120-Volt AC - Motor: 1/8HP at 120-Volt AC - Coverage: 150 Degree, 450 Square Feet. NEUTRAL (WHITE) WIRE IS REQUIRED. Decorator wall plate is provided with the product (in the box).Feature
Detects Motion & Auto Turns Lights On/Off. FREE decorator wall plate!