INSTA-SET^TMCA Accelerator^{Compatible with Plastic & Foam
100% Foam Safe | For ALL CA Glues}
Quality product from Bob Smith Industries Incorporated (BSI), Made in U.S.A.

INSTA-SET^TM is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET^TMin a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET^TM significantly enhances a joint's strength. For difficult to bond materials, INSTA-SET^TM can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET^TM is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

Directions
Spray INSTA-SET 4-6in. away from cyanacrylate for instant curing. Can be applied to opposite surface before application of CA. Compatible with clear plastic and white foam. DO NOT USE WITH THIN CA.

Warning: Combustible Liquid. Use with adequate ventilation.

Bob Smith Quick Links: | CA Accelerators/Remover | Cyanoacrylate(CA) Glue/Aquarium Frag Glue | Epoxy | CA Extended Tips |