Item Descriptions:

color:

Matte clear

Two-pack acrylic urethane spray which is most suitable for coating requiring a tough coating film

【Application】

Painting for plastics and machinery, such as automobiles, motorcycles, shutters, gateways and vending machines

【Characteristic】

- Drying is fast and solvent resistance improves after complete curing of the coating film

· Achieve a beautiful finish that is strong and gloss comparable to baked coat

【Notes】

* At the temperature below 5 degrees C in winter, the curing reaction will be delayed greatly so please do not paint.

* Since it may violate the foundation, try painting in an inconspicuous part, please make sure that there is no abnormality such as drying property, influence on the substrate, etc. before applying it.

Please select and paint the day with a low humidity which is fine weather.

* When you throw away the paint that is left unavoidable, please spread it out to the newspaper etc. outdoors without a fire, please dispose as general waste after completely dry.

* When disposing of the container, please pull out the paint and gas inside sufficiently (until the jet sound disappears) and clearly distinguish it from other garbage and dispose of it.

※ You can not spray on the container while it is upside down.

※ The color of the color chart and cap may differ slightly from the color of the contents.

* Coating area drying time may increase or decrease depending on the weather condition painting material painting method etc.

※ Please wash the used tools with lacquered diluent before initial curing (within 30 minutes).

※ Since the spout may be dry, please try painting newspaper etc. to paint every painting interval.

※ When using at an interval, please turn the container upside down for about 2 seconds to avoid clogging the squirt □, please wipe the spray □ well.

※ Please use it after the can opening within that day.

※ Because it is 2 liquid type, it solidifies in the container.

Features:

• Contents: 315 mL
• Color: Matte clear
• Standard coated area (2 coats): 0.6 to 1.0 m 2
• Drying time: Initial drying 30 minutes · Initial curing drying 60 minutes · Curing drying 78 hours (temperature 20 ° C. · humidity 65%)
• Overcoating: After 10 to 20 minutes
• Specifications: First petroleum type 126 mL (dimethyl ether · LP gas) · Flammable · No fires
• Type: 2 pack acrylic urethane resin paint

Product information:

Shipping Weight: 340 g

Package Dimensions: 5.59 x 5.79 x 20.40 cm