UGEARS - Tractor
UGEARS Tractor is a mechanical 3D puzzle, a self-assembly model with no glue or any special tools (the parts are ready-made and can be simply removed from the board). To be assembled according to the manual.
It is a tractor. All-wheel drive. Three control modes. It can pass around 800mm at a leisurely pace. In this case, the “engine” works rhythmically and the pistons move.
Features :
- No glue or any hand tools needed for model assembly - the parts are ready-made and can be simply removed from the board and assembled together.
- All-wheel drive.
- Three control modes.
- It can pass around 800mm at a leisurely pace.
- In this case the “engine” works rhythmically and the pistons move.
- In the “park” mode the tractor can be started by spinning the big wheel.
- In the “drive” mode the tractor will move at a leisurely pace with a speed of approximately 5 cm per second.
- If the “sport” is selected, the tractor will speed forward.
Technical Specifications :
- Material : Plywood
- Manuals : English
- Model Dimension : 201mm (l) × 87mm (w) × 137mm (h)
- Packaging Dimension : 370mm (l) × 170mm (w) × 30mm (h)
- Made in Ukraine
- 97 Parts
Compatibility :
Model Assembly Tips :
- If you hold the board with its front side directed to you, it is better to remove the parts by pulling them. In this case, if a burr is pulled together with a part, it will make a pit in the board, not in the part. The best solution is to incise the hangers with a knife.
- If you have difficulties in inserting a toothpick in the assembled gearwheel, rub the toothpick with a candle.
- You may also lubricate all the projecting axes of the gearwheels before installing them on the frame. In this case the friction during rotation will be minimal.
- Note: do not lubricate the parts of pendulum connection with a candle – two projecting sticks in the tractor or timer. In this case the pendulum will not swing but skid.
- Try to remove big burrs on the gearwheels, if any. The motion of some models is very delicate, and they may hinder it.
- If any gearwheel creaks or squeaks, lubricate it with a regular candle: paraffin or wax. If the plywood edge is too resinous and some teeth tend to seize, which happens quite rarely, lubricate the gearwheel in the same manner.
Additional Information :
- Recommended Age : 14+
- Choking Hazard : Small parts not for children under 14 years old or any individuals who have tendency to place inedible objects in their mouths.
- Visit us at: https://toyactually.sg/