Features:
-100% new and high quality.
1, the perfect design, camera with remote control switch, convenient easy recording / monitoring;
2, AVI format video recording and convenient direct playback PC, to easily upload video website;
3, high-speed dynamic video, light and dark environments transient response;
4, built-in lithium battery for 3 hours of continuous use. The battery can be increased!
5, fool-operation, integration of lighting control instructions;
6, Mini USB to computer and video uploading and downloading charge transfer function;
Operating Instructions:
1. Power On / Off: first switch on the back of the Smoke 1 key, press the A button for 3 seconds, the blue lights for power, then press the A button for 3 seconds or more blue light the lamp for the shutdown.
2. The camera mode: In standby mode, press the B button blue light flash once, a camera, again and again, you can take pictures continuously.
3. Video Mode: In standby mode, press the B button, blue light flashes three times to enter video mode, press the B button to pause recording and automatically save, then press the A button off, finally smoke switch to the back 0 key to turn off the power.
4. Motion detection recording:
5. separate recording
Parameters:
Battery: 3.7V
Battery capacity: 350 mA
Video Format: AVI
Resolution: 1280 * 960 video
Common faults and solutions:
1. The circumstances under remote control failure, look at the remote control does not light up in the following key operation time in the remote control lamp, the lamp will not light if you press the A key to the case or the B key on the remote control instructions inside the battery battery has run out. At this point you can open yourself a screw on the back of the remote control. This remote control that looks at the inside of the battery type, or holding their own original battery to the store to buy a put something after it
2. The main power switch on the back to open the smoke to the 1 key, the back light is still not lit, then legend has run out of power, then the need to turn on the power switch, because this product is only turned on the back of the main power tie switch to the open state can only be connected to the computer, charging time is three hours can be filled. Do not turn off the main power and then the back of the smoke. Continue to the open state, long press the remote control button for 3 seconds or more A smoke test whether the charge into the electricity or whether the video and photographs.
3. Under the remote control under normal conditions and smoke electric case, use the remote video camera and the case does not work. First, the smoke connected to the computer. Open My Computer, find out the removable disk. After finding the tie and then right-click the disk to see whether the attribute memory space is full. If no red under a lot of blue note has been recorded in the memory space is full, then you need to clean the disk file space to solve the problem. If you smoke inside the file memory to be useful to you, then you can copy it to your computer above. Try to tie the release of memory space inside to prevent the time and space you continue to use enough.
Note:
Smoke in the case can not be charged using the remote controller and video camera, it is easy to burn out the motherboard and chip
Common Problems and Solutions:
Unable to boot, the first data line plugged into the computer, to see whether the connection, if the computer does not recognize, for data lines to try again, if still no response, press the reset button and try again.
Recording can not play, you may file with a virus, it is recommended for the first computer virus or format file and try again
Note:
1. Please allow 1-2cm error due to manual measurement. Please make sure you do not mind before you bid.
2. The colors may be different as the difference display, Please understand
Package included:
1 set 
