Product description

1. Light source: 3LED*10LM

2. Solar plate: poly-silicon 2V/162mA

3. Waterproof: IP55

4. Material: ABS, PC

5. Charge time: 6~8H

6. Using time: u0026gt;8H

7. Accumulator: Ni-MH/AA/1.2V*1300mA

1. Pull up the lamp cover from the middle slot under the lamp cover with a slot type screwdriver

2. Take out the plastic part in the part bag; hit it into the pre-drilled hole in the wall; lock the product in the wall with screws through the screw holes in the product with a screwdriver; if the mounting surface is wooden, the plastic part is not necessary

3. Pull out battery separator to work

4. After the installation, the product turns into automatically light-operated mode. In the daytime, it turns off and charges automatically; in the nights, it turns on automatically

1. Far from fire source, otherwise the accumulator may be explosive

2. Avoid usage in high temperature, humidity and corrosive environment, otherwise parts may be damaged

3. Charge in 3 months interval at least when no usage for a long time, otherwise accumulator life performance would be effected adversely

4. Solar plate should be irradiated by solar light directly to get the best charging efficiency, and the charging efficiency is different from different season's solar light