Item Descriptions:

Body function:

Cycle A / B selectable

Language selectable (Press and hold set button to select language)

km / Mile display selectable

Watch (12H / 24H switchable)

Power supply automatic ON / OFF function

With backlight

Auto memory and data update function

Auto scan function: Automatically acquires information on each mode and displays it automatically.

Power Saving Function (Sleep Mode): When the signal does not enter for about 4 minutes, it enters the power saving mode only for the time display. [CLOCK]

2.4G digital wireless with latest ID eliminating interference as much as possible

Since the wireless system is upgrading to digital of 2.4 GHz band, it is comfortable without worry of crosstalk.

Usage notice

Pairing procedure: Put the battery of the main body → enter numerical value → complete input → insert the sensor's battery immediately (After successfully pairing, it will be tested by hand at hand.)

Adjust the angle of the sensor so that the distance between the sensor and the speed magnet is 1.5 mm and the distance between the sensor and the cadence magnet is 3 mm in order to successfully pair after successfully pairing.

Please note that Cadence's measurement begins after the speed is measured and displayed on the screen.

So, if only cadence is not displayed correctly, we recommend that you attach the sensor etc. to the bicycle correctly and actually try running.

④ This product is waterproof, but not completely waterproof.

Display display

Stopwatch [STOPWATCH]

Mileage [DIST]

Travel time [RIDETIME]

Running speed

Average speed [AVG - S]

Maximum speed [MAX - S]

Calories burned [CALORIE]

CO2 removal amount [CO2]

Temperature during running [TEMP]

Cadence [CADENC]: (pedal rotation speed)

Total mileage [TOT-DIST]

Total running time [TOT-TIME]

Memory [MEMORY]

specification

Power Source: Computer (Receiver): 1 x CR 2032 Sensor (Transmitter): 1 x CR 2032

Size: 6.3 x 4 x 2 cm (2.5 x 1.6 x .8 in)

Battery life: computer: about 1 year (when used one hour a day)

Operating temperature: 0 ° C - 50 ° C, 32 - 133 F

accessories

: ① Cycle computer Wireless ② 2 x CR 2032 battery

③ Speed ​​magnet ④ O ring

⑤ 2 types Cadence magnet ⑥ sensor

⑦ 4 x single-sided tape ⑧ bracket ⑨ 6 x nylon tie

* For details on usage etc., please see the following movie.

https://youtu.be/4UOmC5KVAwI

For the Japanese instruction manual, please visit the following site.

https://s3.amazonaws.com/ebayimg.appinthestore.com/EKEYJP/%E3%82%B5%E3%82%A4%E3%82%AF%E3%83%AB%E3%82%B3%E3

% 83% B 3% E 3% 83% 94% E 3% 83% A 5% E 3% 83% BC% E 3% 82% BF% E 3% 83% BC% E 5% 8 F% 96% E 6% 89% B 1% E 6% 9 B

% B8.pdf

Features:

• 【Maximum speed, average speed recorded, visually confirm daily running speed】 Display daily running speed at the top of the screen, maximum speed, average speed, mileage, time etc at the bottom of the screen.
• There is also a relative speed indication and you can check whether it is running faster than the average speed or visually.
• [Cadence function] When traveling, you can measure cadence (pedal revolution per minute), average cadence, maximum cadence.
• [Multi-function installed] Two languages ​​selection, two bicycle correspondence, measurement unit selection (KM / hr, Mile / hr), clock setting (12H / 24H), automatic power ON / OFF function, auto scan function,
• Stopwatch, mileage, total distance, running time, total time, temperature, calorie consumption, CO2 deletion amount etc measured.
• [Built-in backlight] The backlight is built-in so that it can be used even at night.
• [Power Saving Function] If you do not use for more than 4 minutes, it will be a clock display only and will automatically switch to sleep mode.
• 【Note】 Before using, set the numerical value by inserting the battery in the main body.
• After completing the setting, enter automatic pairing mode.
• At that time, put the battery in the sensor.
• Then you can pair with success.
• Adjust the angle of the sensor so that the distance between the sensor and the speed magnet is 1.5 mm and the distance between the sensor and the cadence magnet is 3 mm so that you can receive it successfully after pairing.
• (If you do not pair, it will not work, you can not measure speed, cadence, etc.) * For details on how to use, please see the following movie: https: //youtu.be/4UOmC5KVAwI

Product information:

Shipping Weight: 140 g

Package Dimensions: 7.19 x 15.01 x 18.11 cm