100% Brand new and high quality
The water flow sensor is applied for water heater, imprinter, automatic water machine, and other flow metering equipment.
Portable size and light weight, easy to install
With stainless steel ball inside of the impeller, wear-proof
Up and down structure stress applied for the seal ring, avoid to leak
Imported Hall element, adopt pouring sealant encapsulation to avoid to leak and age
Note:
When magnetic material is close with the sensor, its characteristics may vary.
In order to avoid particle debris, the sensor must be installed after a filter.
The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor\'s measurement accuracy.
| Technical Parameters | |
| External threads | 3/4 inch |
| Minimum rated working voltage | DC4.5 5V-24V |
| Maximum working current | 15 mA(DC 5V) |
| Working voltage range | DC 5~18 V |
| Load capacity | ≤10 mA(DC 5V) |
| Operating temperature range | ≤80℃ |
| Operating humidity range | 35%~90%RH (no frost) |
| Flow Range | 1-60L/min |
| Allow compression | Water pressure 1.75Mpa below |
| Storage Temperature | -25~+ 80℃ |
| Storage Humidity | 25%~95%RH |
| Output pulse high level | >DC 4.5 V(Input Voltage DC 5V) |
| Output pulse low level |
|
| Output pulse duty ratio | 50±10% |
| Output Rise Time | 0.04μS |
| Output Fall Time | 0.18μS |
| Frequency | F=5.5 * Q (L / Min) error: ± 2% |
| Dimension | Approx. 6.5 x 4cm (L*W) |
| Cable Length | Approx. 15cm |
| Color | Black |
