Desktop directional pulley shoot car tires are hollow design， with a diameter of 6.5cm， thickness 2cm， outsourcing shockproof soft shot so that the image stabilizer is not beating， the shooting will not change the course of travel， you can freely set the line or may be maximum around 210 angular orientation walk. PTZ can be installed， and the design of the car plate has three standard interfaces 1/4 screws， center 1/4 and 3/8 (3/8 unscrew the center screw can be converted into a 1/4 screw interface) Screw Interface， easy to install backhoes stand， a small head， boots mouth seat ... etc.， making it easier to work with accessories such as cameras， photographic light， LCD screen， and other equipment used in conjunction.

The car can be used for any smooth surface imaging platform， to create smooth motion horizontal axis. It can also be used for circular or linear. Especially for low-angle and video. This car wheel angle can be adjusted to accomplish camera video.

Compared with the four-wheel pulley car， three tackles in addition to the regular taxi， but also can place the camera position as the center of rotation of the lens panning shot. For the film， this is a creative lens. For still photography， the panorama of the pre-filming with a new tool.


Material: aluminum， silicone
Wheel size: 63mm (diameter); 18mm (thickness)
Wheel angle: 210 ° adjustable (with scale)
Plate size: 240mm (side); 140mm (radius) (detailed dimensions refer to figure)