Product Name: car door wrist

Material: ABS plating

Origin: China

Product introduction

Symbol of luxury cars， metal craft， reflect the luxurious feeling and personality out of the ordinary. To make your car more fashionablebeauty! The more distinguished!

Product features

1， the supplies for the ABS material， light texture.

2， according to various models and design， special， 3M back glue paste，easy to install.

3， ABS production， and chrome plated surface， never fade， blister packaging.

Method of use

1， surface cleaning: paste surfaces should be kept absolutely clean and dry， general cleaning available without fibre shedding cloth dipped in 50% alcohol， isopropyl alcohol， acetone or toluene solution to scrub， after surface solvent cleaning solvent shall be played only after a thorough pasting.

2， product paste: paste before the products shall be required to install the product on the position adjust. To determine the location of product installation， and then tear off the affixed decorative behind 3M glueprotecting paper， the operation should avoid finger contact with the rubbersurface， you should use the beat， so as to ensure the full contact with the rubber surface and wetting.

3， product and components glue， 24 hours do not contact with the waterand the big dust can achieve the best adhesion.

Matters needing attention

Please ensure that the body before installing gas or oil without water. And wipe clean with a soft cloth and then paste. The best two days do notwash after paste.