• Energy efficiency
  The light bulbs burn very cool, while incandescent bulbs emit 98 per cent of their energy as heat! Much more bang for the buck
• Long life
  These lights can last from 50,000 to 100,000 hours. Incandescent light bulbs typically last around 1,000 hours and fluorescents are good for roughly 10,000 hours
• Rugged durability
  LED lights have no fragile filament to contend with, and no fragile tube. They are resistant to heat, cold, and shock
• Lumens per watt
  While manufacturers are still finding new ways to increase this ratio, Inc. has been able to produce an LED bulb that generates 131 lumens / watt. This is research, though. Today´s available LEDs are the same as compact florescent bulbs, averaging around 55. Incandescent bulbs wander sadly in at about 15

FEATURES

• Utilize the (U2) LED to guarantee high brightness
• Maximum output of 900 lumens
• Integrated "precision digital optics technology" provides extreme reflector performance
• Boast a peak beam intensity of 9000CD and a throw distance of up to 190 meters
• Dual-switch design ensures unprecedented ease of use
• Secondary red LED provides constant/flashing illumination
• Indicate battery voltage with a red flashing LED (accurate to 0.1V)
• High efficiency constant current circuit enables maximum runtime of up to 20 hours
• Direct access to ultra-low and turbo output
• Reverse polarity protection prevents damage from an incorrectly inserted battery
• Detachable anti-rolling clip
• Toughened ultra-clear mineral glass with anti-reflective coating
• Constructed from aero grade aluminum alloy
• HAIII military grade hard-anodized
• Waterproof in accordance with IPX-8 (2 meters submersible)
• Impact resistant range is up to 1.5m

Specifications

Package Includes

• 1 x Flashlight

Extra Info

• 1. Please do not irradiate it to human eyes, especially for children, or else, it may cause temporary blindness for the harsh light of flashlights
• 2. Do not meddle with the head of torch or separate the reflector and the bulb
• 3. Wipe flashlight with soft fabric after use
• 4. In case of erosion causing roughness of the torch movements, try to clear and air it
• 5. Silicon grease can be applied to the interface
• 6. Remove battery if not in use for long period
• 7. Strongly suggest using the battery with protecting board, so that it can avoid over-change and over-discharge, and protect battery and prolong its service life
• 8. While using 16340 such kinds of rechargeable lithium battery, you should avoid over-charge and over-discharge, it means that: charge at it once when the light of flashlight remarkably dimmed
• 9. Avoid direct sunlight