Feature1.Solar powered， save energy;2.Waterproof， heatproof and durable;3.Auto delay and restore power in dark;4.Energy-saving， environment-protecting;5.Accurate PIR sensor brightens light once it detects motion in darkness;6.Automatically sense day or night;7.Over 8 hours lighting time after one day fully charge;8.Recharged by sunlight at daytime and store power for overnight lighting;9.Integrated design for motion PIR and Ray control， 120 degree wide angle detection;10.Easy mounting with included wall mounting screws and expansion pillar hinge， widely used for illumination in pathway， driveway， garden， yard， aisle， porch， patio， and anywhere in which getting solar energy;SpecificationSolar Panel: 5.5V / 0.6W， 17% efficiency;Li-ion Battery: 3.7V， 2200mAh;LED: 8 PCS， 1.6W， 6000--6500K， 160Lumers;High Light Delay: 20 secondsRay Sensor: Auto-light at night Operating Mode: light control + infrared body sensorsSensor: light sensor and sensitive motion sensorWorking Time: More than 8 hoursSolar Charging Time: 6 hours (1000W/m2)Motion Angel and Distance: 120 degree/ 3 metersLighting Mode: Bright / DIM / Off (Bright: motion activates for lighting when someone get close; DIM: weak lighting for saving power; Off: restore energy and keep dark in the daytime.)Switch Pin: Turn on/ off the light by hand;Waterproof: IP64;Material: ABS Plastic;Product Size: 14 * 10.5 * 5 cm (5.51* 4.13 * 1.97 inch);Net Wight: 185 g (0.41 lb)Package Size: 11.2 * 5.8 * 14.5 cmPackage Wight: 230 g (0.51 lb)Warranty: one year warranty.Package Included1 x Solar PIR Motion Sensor LED Lamp 2 x Expansion Pillar-hinge2 x Installing Screws1 x User Manual1 x PinTips1.Remove the protective film from the solar panel before using;2.Please fully charge before the first using;3.Make sure click the “ON/OFF” button for the first time before using;4.Place or install the solar lamp under the sunlight without any shade;5.Solar panel can charge quicker under strong sunlight. It may cannot charge or charge slowly under weak sunlight. The charging time depends on the sunlight intensity;6.During of lighting depends on the intensity and time length for sunlight.Attentions1.Solar panel surface must be kept clean to collect sunlight effectively;2.The battery might be out of power if there is no good sunlight in 3 mouths. And reactivate and unlock the device is required otherwise it cannot work;3.Under extreme cold temperatures， or in a cloudy， or rainy， or snowy day， battery may not be fully charged. In such cases， solar lamp may not stay illuminated as given time;4.This device is solar powered led light. The lamp illuminates when it is charged by the sun. The sun conditions will affect the lamp’s illumination. It should not be compared with any spotlight or floodlight that is powered by other power sources.Warning1.Keep the device far from fire in order to avoid explosion;2.Any severe beat or shock to the charger is not recommended;3.Disassemble to the charger is not recommended in case of damaging the device.