GENUINE and ORIGINAL Packing same as Pictures.

Provide Tracking Number

High-quality sound boundary type that corresponds to the IC recorder or personal computer ※ 1.
Because less susceptible to reflections from the floor, and can be picked up at a high clarity.
Simple design that does not aware of the microphone to the speaker.
Less noticeable in table top, I adopt a simple design that does not claim. It is the form that does not consciousness as a microphone to the speaker.
I cope with the meeting in large numbers to achieve cascading up to four *.
Etc. to increase or decrease the number by the size of the conference, I can cope with on a case-by-case basis.
* The PC / IC recorder of some, you may not be able to cascade up to four.
Low-cut switch that you can reduce the vibration noise of the floor, reduce the occurrence of howling (PAT.) installed.
A condensed microphone technology of our own, it is equipped with a low-cut switch. I can change-over switch one FLAT ⇔ L-CUT of (low-cut).
I prepare for take-up storage space that can adjust the length of the code on the bottom.
Adjustment of the code can not only take-up storage space on the bottom, and can put it houses the code when not in use.
I adopt a plug-in power system ※ 2 do not need a battery.
※ I can not use it on a PC / IC recorder one part.
※ 2 plug-in power system operates power is supplied to the microphone from the microphone of the terminal equipment to be connected.
Model back electret condenser
All characteristic directivity
80 ~ 10,000 Hz frequency characteristic
Sensitivity-36dB (0dB = 1V/1Pa, 1kHz)
Impedance 1.8kΩ
Power supply plug-in power system
H25 × 118mm Dimensions
About 115g mass
Φ3.5mm plug gold-plated 3-pin mini
Code 2.0m