THE ONLY BIDET ATTACHMENT WITH 6 MONTHS ONSITE 1 TO 1 REPLACEMENT WARRANTY

WHY BUY FROM US? BECAUSE WITH OUR 7 DAY MONEY BACK GUARANTEE, YOU CAN BUY WITH PEACE OF MIND THAT YOU CAN CANCEL THE ORDER AND GET YOUR MONEY BACK IF OUR BIDET ATTACHMENT CANNOT FIT YOUR TOILET BOWL REGARDLESS WHETHER YOU INSTALL YOURSELF OR WE INSTALL FOR YOU. YOU DO NOT HAVE TO INCUR ANY COST OR TIME TO RETURN OUR BIDET ATTACHMENT, JUST CONTACT US AT 90252132 FOR COLLECTION !

ALSO, WHEN YOU ENCOUNTER PROBLEM WITH OUR BIDET ATTACHMENT DURING WARRANTY PERIOD, JUST CONTACT US AT 90252132, WE WILL GO ONSITE TO INSPECT, INVESTIGATE AND REPLACE THE FAULTY ONE WITH A NEW BIDET ATTACHMENT. HASSLE-FREE FOR YOU! 



* SINCE YOU HAVE PAID VIA QOO, YOUR REFUND WILL BE PROCESSED BY QOO AND MONEY REFUND BACK TO YOU IN DUE COURSE.

BUY WITH NO INSTALLATION


IMPORTANT : TO QUALIFY FOR OUR 7 DAY MONEY BACK GUARANTEE, THE SEALED PLASTIC BAG MUST NOT BE BROKEN. SO BEFORE YOU TEAR THE PLASTIC BAG, PLEASE CHECK THE FOLLOWING:

1) THE TOILET BOWL SEAT CAN BE REMOVED
2) IF THE TOILET BOWL SEAT CAN BE REMOVED, ENSURE THAT THE TWO SCREWS ROD WILL STILL PROTUDE OUT OF THE HOLE SO THAT IT CAN BE FASTENED WITH THE NUTS BECAUSE THE TOILET BOWL SEAT WILL BE RAISED BY 1.2CM AFTER PUTTING IN THE BIDET ATTACHMENT
3) ENSURE THAT WATER SUPPLY OUTLET IS ACCESSIBLE TO CONNECT THE T-JOINT.
4) PLEASE ENSURE THAT THE INNER CURVE PART OF THE SEAT COVER (SEE IMAGE A) DOES NOT EXTENDED INTO THE TOILET BOWL, IF IT DOES, THEN THE SEAT COVER WILL PRESS ON BIDET AND WILL NOT BE ABLE TO PUT DOWN COMPLETE (SEE IMAGE B)


IMAGE A
 

IMAGE B

  

IF STILL NOT SURE, PLEASE REFER TO PICTURES OF INSTALLATION STEPS BELOW. 


If you discover that the bidet attachment cannot fit after buying, no worry, you can return back to us unused and still packed in sealed original packing within 7 days from date of delivery, we will refund your money. Just sms me at 90252132 with the following information to arrange collection.

1) Name
2) Contact Number
3) Qoo Order No.
4) Address
5) Date of purchase
6) Quantity
7) Reason for returning
8) Preferred date and time of collection

BUY WITH INSTALLATION 

When we discover onsite that our bidet attachment cannot fit your toilet bowl, we will bring back the bidet attachment, and you can proceed to cancel the order so as to receive your refund. 

FUNCTION

1. Easy Single Knob Control

2. Water Pressure Adjustable

3. Self Cleaning Nozzle


4. Single Retractable Nozzle


5. Easy Installation 

WHAT IS IN THE BOX

TOOLS NEEDED

INSTALLATION STEPS

STEP 1

Insert one end of the rubber tube through the plastic nut.

Then screw and hand tighten the nut to secure the rubber tube to the bidet.

STEP 2

Insert the other end of the rubber tube into the nut on the T-Joint. Make sure you push
the tube as in as possible.

Screw the nut onto the T-Joint.

STEP 3

Remove the toilet seat cover from the toilet bowl.

STEP 4

Place the bidet on top, adjust the bidet so that the nozzle is at the center position.

IMPORTANT - Please ensure that there is gap between the toilet bowl and nozzle.

STEP 5

Inserting the 2 screws stud of the toilet seat cover into the holes and fastened the nuts below to secure the bidet onto the toilet bowl. 

STEP 6

Turn off the water supply by turning the water valve.

STEP 7

Empty the water in the toilet bowl water tank.

THERE ARE TWO POINTS WHERE YOU CAN CONNECT THE T-JOINT

A) Connect at the water inlet of the toilet bowl water tank.

B) Connect at the water supply outlet.

A) Connect at the water inlet of the toilet bowl water tank

STEP 1

Remove the flexible water pipe from the water inlet.

STEP 2

Fastened the T-Joint to the water inlet. 

STEP 3

Connect and fasten the flexible pipe to the T-Joint.

Turn on the water valve and check for any water leaking from the T-Joint connection points. If there is water leaking, tighten the connection further.

B) Connect at the water supply outlet

STEP 1

Remove the flexible water pipe from the water supply outlet.

 

STEP 2

Fastened the T-Joint to the water supply outlet. 

 

STEP 3

Connect and fasten the flexible pipe to the T-Joint.

 

Turn on the water valve and check for any water leaking from the T-Joint connection points. If there is water leaking, tighten the connection further.

 

TESTING THE BIDET

Test the self-Cleaning Function - Turn knob to LEFT

Test the Cleaning Function - Turn knob to RIGHT

 

 

Installation Terms & Conditions
By confirming order, Buyer agreed that he/she will not hold Seller liable for any damages occurred in the course of installing the bidet attachment. 

6 MONTHS WARRANTY 

Every DIYBIDET comes with a 6 months warranty on manufacturing defects with one time replacement. 

The warranty excludes the following:

1) Replacement of discolored or used parts from chemicals use for cleaning or water discoloration. 

2) Damage to or malfunction of the unit resulting from improper installation, negligence, misuse, abuse or tampering by unauthorised repair personnel. 

3) Under no circumstance be held liable for any loss or damage direct, consequential or incidental arising out of the use of or inability to use this product. 

4) Age of the bidet, improper installation can result plumbing breakage and water flooding to the bathroom or home. This product must be used at the owner's risk. Therefore, the owner hereby releases the manufacturer and distributor from any and all claims for damage where the above conditions exist.

5) The Seller reserved the rights to replace the defective bidet under warranty with another model if the sold model is no longer available.

 

Note : Proof of purchase must be produced when claiming warranty

WILL CONTACT YOU TO ARRANGE DELIVERY AND INSTALLATION SCHEDULE AFTER RECEIVED ORDER


ENtER MY SHOP FOR MORE EXCITING PRODUCTS