HONEYSEW ADJUSTABLE INVISIBLE ZIP FOOT LOW SHANK FOR SINGER BROTHER SILVER #941100000
[Product Information]
HONEYSEW ADJUSTABLE INVISIBLE ZIP FOOT LOW SHANK FOR SINGER BROTHER SILVER #941100000
This foot will fit all Low Shank sewing machines, If you are not sure what type of shank your sewing machine is, refer to the Image on how to determine your shank size (picture shows).
Attach the invisible zipper foot to the machine, with the needle lined up with center mark. Place open zipper face-down on right side of fabric as shown. Pin in place with coil on seam line (5/8" in) and top stop ¾" below raw edge of garment (1a). With right-hand groove of foot over coil, stitch zipper until the foot hits the slider (remove pins as you come to them.) Back-tack.
To attach the other half of the zipper, pin tape face-down with coil on seam line (5/8" in) and top stop ¾" below raw edge of garment, as before. Make sure that the zipper is not twisted at the bottom. Use the left-hand groove of foot, making sure that the center marking is still lined up with the needle and stitch, as before.
Install zippers on your garment with professional results. The Concealed Invisible Zipper Sewing Machine Presser Foot allows you to create beautiful and professional concealed zippers with ease and precision.