DESCRIPTIONS

• XL6009 DC-DC Booster Voltage Step Up Regulator Power Supply Module
• Built With Digital Display
• Input Voltage : 3-32V
• Output Voltage : 5-35V
• Output Current : 4A (MAX)
• Output Ripple: 50mV (Higher voltage, larger current and ripple)
• Conversion Efficiency: <= 94%
• Switching Frequency: 400KHz
• Load Regulation: +/- 0.5%
• Voltage Regulation: +/- 0.5%
• Operating Temperature: -45℃ to +85℃
• Dimension : 60 x 35 x 13.5mm
• Weight : 24g

The self-calibration method of voltmeter:

1. When the voltmeter shows output voltage, long press the right button for 2 seconds, then release, voltmeter and "OUT" LED flash in synchronization. Now the voltmeter enters into output voltage calibration mode. Similarly, when the voltmeter shows input voltage, long press the right button for 2 seconds, then release, voltmeter and "IN" LED flash in synchronization, now the voltmeter enters into input voltage calibration mode.
2. Touch the right button, the voltage rises a unit; Touch the left button, the voltage drops a unit. Due to a unit is less than 0.1 V, so you need to continuously press 5 times to see that the voltmeter changes 0.1 V
3. After calibration, long press the right button for 2 seconds, then release. Now the voltmeter exits the voltage calibration mode. All the parameters will be saved automatically.(Note: Once calibrate the voltmeter, you can get the accurate voltage value on the whole voltage range)

​​PACKAGE INCLUDES

• 1 x XL6009 DC-DC Booster Voltage Step Up Regulator Power Supply Module With Display