Supstronics X205 Expansion Board With Case For Raspberry Pi 2 Model B \/ Raspberry Pi B+
Key Feature:
Input Voltage - 6V to 20Vdc converted to 5V， 3A via step-down DC\/DC converter to power the Raspberry Pi RS232 serial communications - Control the Raspberry Pi over RS232 or connect to external serial accessories RS485 serial communications - You will be able to have a communication port for your field bus directly connected to your RPi! - It will allow up to 32 devices to communicate through the same data line over a cable length of up to 4，000ft with a maximum data rate of 10Mbit\/s. Audio - 3.5mm MIC in jack - 3.5mm stereo audio jack - Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2) Wireless - WiFi (IEEE 802.11b\/g\/n) with external antenna - IR sensor (38KHz) USB Storage - Self-powered USB hub with 3 ports Real-time clock (RTC) - Based on DS3231SN with included CR2032 battery GPIO Control - 8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current Misc - Power output socket - Camera flex slot so camera can still be used with the expansion board attached - DIP switch to remove connection from RPi's pin header - Directly connected on top of the Raspberry Pi using the board GPIO header pins - No wiring nor soldering is required - Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards - Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW! Dimensions - 85 x 56mm (Same size as Raspberry Pi) Please refer to http:\/\/www.suptronics.com\/Xseries.html
Package included:
1 x X205 expansion board
1 x USB adapter
1 x 2.4GHz WIFI antenna
4 x nylon spacers (M3 x 20mm)
8 x nylon screws (M3 x 6mm) 1 x Case